G4 Cube AirPort Bracket Blanking Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Don't have the AirPort bracket? Need to remove it? Use this to fill the space!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
When I was building my absolutely overbuilt G4 Cube, I had an issue: I needed to remove the AirPort bracket to fit my SSD bracket in. Fair enough, since I don't use wireless networking on these old machines anyway.
However, seeing as I'm using a clear chassis with my Cube, and seeing as the AirPort bracket helps hold some cables in place, I didn't want to just delete it and leave nothing there. So I made this. You can print it in whatever color you like. I designed it to be 2mm thick to match the stock bracket but it might print a little over that; consider scaling Z in your slicer a touch to account for this (if you're putting this in a stock chassis)
Fairly simple print. Wanted to fillet all the edges but unfortunately Tinkercad was being kinda difficult. Hopefully the partial filleting is okay.
(Note: The picture of this on my Cube is a customized one-off I made for my Cube project. The file you're downloading here is free of any text.)