P
Printables8042
CS2 Skeleton Knife G4 Stryker
The G4 stryker (throwing) knife also seen in CSGO. Tried to keep the dimensions as close to the real life counter part as possible but couldn't find all of them.
- Downloads
- 2,463
- Likes
- 192
- Rating
- 4.63
Search results: g4
Counting matching models…
P
Printablesandreasjk
Ubiquiti Unifi G4 Doorbell Pro Parametric Wedge Mount
Parametric model for mounting the Unifi G4 Doorbell Pro at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell. Rendered a couple of versions as STL,…
- Downloads
- 1,122
- Likes
- 85
- Rating
- 4.83
P
PrintablesGinBook
Cover for AQARA Doorbell G4
The protection was created due to the lack of cover from meteorological conditions. The manufacturer recommends covering from rain. For those who use an angle pad, an auxiliary plate must be added between the cover and the angle pad. At…
- Downloads
- 835
- Likes
- 38
- Rating
- 4.86
P
PrintablesAnderfrank
Aqara G4 Doorbell chime mount
The Aqara G4 Doorbell uses a digital chime and their solution is to adhere it with a sticker to wherever you want. I wanted to mount it near a outlet but also mount it to the power adapter and not stick it to my wall. I found a mount that…
- Downloads
- 253
- Likes
- 17
- Rating
- 5
P
Printablestimn
Gas meter inductive sensor holder G4 RF1 c
This is a remix of the holder for an inductive sensor on a Pipersberg G4 RF1 c . It is used for an 18mm sensor with which I got more stable readings. It also comes with a thicker bolt that fits more tightly in the little cavity. I have…
- Downloads
- 217
- Likes
- 4
- Rating
- 5
P
PrintablesModer
motorola moro g42
obal na mobila s desingem i am groot zapuštěný nápis je potřeba vymněnit filament za risku
- Downloads
- 86
- Likes
- 8
- Rating
- 1
P
PrintablesSamsPrints
HP EliteDesk 800 G4 SFF Vertical Stand - Simplified
A stand to hold a HP EliteDesk 800 G4 SFF vertically.
- Downloads
- 79
- Likes
- 6
- Rating
- 5
P
PrintablesT3TR4
Nokia G42 Smartphone Cover - 2 Variants
Designed a cover for my newly acquired Nokia G42. My first attempt is a bit bulky but I uploaded it nevertheless because maybe someone needs some extra protection for their smartphone. The slim variant has padded corners for extra fall…
- Downloads
- 67
- Likes
- 1
- Rating
- 0
P
PrintablesKarim
HarvestRight Camera Mount for Ubiquiti G4 Instant
See https://www.printables.com/model/507270-harvestright-camera-mount for @dgardner_169337 excellent solution. I need a new bracket to fit the camera that I had. It needs 4 x M3 x 12mm bolts. Printed in PLA+ with 15% infill, can use other…
- Downloads
- 63
- Likes
- 3
- Rating
- 5
P
PrintablesEddy The Wizard
Asus PG42UQ / HyperX QuadCast mount
Simple mount for attaching the HyperX QuadCast to a Asus PG420UQ monitor.
- Downloads
- 56
- Likes
- 11
- Rating
- 5
P
PrintablesiKOM
Align Trex 450 anti-rotation + Matek G474-Heli case (Rotorflight)
I have created this Align Trex 450 anti-rotation platform with integrated Matek G474-Heli case (Rotorflight). Let me know if you have any suggestions to improve my design or have any questions, let me know in the comments. Thanks :)…
- Downloads
- 44
- Likes
- 0
- Rating
- 0
P
PrintablesZoroSeerus
Redragon G49 Pro Mouse Components + Baseplate for Modding (NOT SE or Base Model)
This is a component set for the Redragon G49 Pro ( NOT SE or Base Model). The main purpose is to provide tools for making 3D printed mice using these internals. I've provided the STEP and F3D. The Fusion file is actually a bit of a mess,…
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
PrintablesOffGrid
3-Inch Toothpick Drone Frame v8 — Sub-250 g, GEPRC Taker G4 + RP3 Covers
What it is The printed airframe from Phase 1 of Project Cheap Drone: a 3-inch toothpick quad that weighs 164 g all-up. That is under 250 g, so it does not need FAA registration. Flown line of sight. In this download Frame v8: body, arms,…
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesSTARGATE
BMW M240i G42 - AUTOID Rear Carbon Arch Spacer
Replacement stand off to mount the rear carbon fiber arches from AUTOID.
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesPiet_gv
Senheiser EWD G4 pack cage for traveling
Model madę to attach with double sided tape to the bottom of the unit for the Senheiser EWD G4 IEM pack to slide in when you want to travel in a small flight case or travel rack with the sender pack could need slight adjustments depending…
- Downloads
- 18
- Likes
- 5
- Rating
- 0
P
PrintablesXodiumLabs
The G4 Cube GPU Cooler
First: This is not my work, this is the work of the amazing Mangomoose, the the guy who made Big Mac (if you've been to Open Sauce 2024 or VCF West 2024, you know what I'm talking about. It's a really, really big Mac Plus made out of 3D…
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
PrintablesKlopDesign
DeWalt DCG409 cutting disc holder
This is a simple cutting disc holder that you can mount in the DeWalt DCF409 TSTAK insert, and probably for other angle grinders too. You can perfectly carry it with the side handle, if you don't throw around with your TSTAK boxes, the…
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesThomas Prevett
Universal (Right or Left side) jetKVM blank for dlford's 19" (Inch) Rackmount for Mini HP ProDesk, EliteDesk, G1, G2, G3, G4, G5, G6 (Right side requires flipping screen in JetKVM settings)
Left side version that replaces the keystone jack cutouts with a proper JetKVM mount instead. **JetKVM specs for reference:** - Angled so display is flat against rack - Width: 43mm - Height: 31mm - Depth: 60mm - Has 2x M2 screw holes on…
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesSKART
Aqara doorbell G4 antitheft case
You will need lock to put inside this case. Something like AliExpress 1005007176654083
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
Printableskfly
EG4 6000XP Knockout Grommets
Parametric threaded grommet protects wires through holes. Fully customizable with flange, threads, nut, and washers. Obviously to meet code you may need to use a different knock out plug or change the original Autodesk fusion file to…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesBURAK KAYMAZ
iMac G4 Power Supply Holder
iMac G4 Power Supply Holder for a project computer. Holds the SFX power supply at the back of the iMac g4 for custom motherboard build. Do not need to disassemble the iMac to put it on.
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesRUR
Mouse case for TeeVolution Terra PRO; Logitech G603; Logitech G703; Logitech G403 Wireless
Mouse case consists of base and cover. Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN PLACE Test…
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
Printables
Ubiqiti G4 Instant Vertical Stand
Vertical stand for the Ubiqiti G4 Instant. It uses the included adheasive and wall mount to secure it to the stand. onshape: https://cad.onshape.com/documents/f70a2de22527961ceee11555/w/60c64aa6690a55d3a0949aab/e/feb026e59b50d9787c273824
P
Printables
Phone charger and holder Apple iMac G4 Style
Print with any materials that you want using the parameter suggested from filament producer. I suggest to use a 0.4mm nozzle and support needed
P
Printables
The G4 Cube GPU Cooler
First: This is not my work, this is the work of the amazing Mangomoose, the the guy who made Big Mac (if you've been to Open Sauce 2024 or VCF West 2024, you know what I'm talking about. It's a really, really big Mac Plus made out of 3D…
P
Printables
HP DL380 G4 Ultra320 SCSI Hard Drive Caddy
This is a 3D-printed hard drive caddy designed for the HP DL380 G4 2U server, specifically for Ultra320 SCSI drives. It features a snap-fit design with a front handle for easy installation and removal. This custom caddy is a great…
P
Printables
Core One UniFi G3 / G4 / G6 Instant Mount
Easily mount your UniFi G3 / G4 / G6 magnetically into the corner of your Core One, just like the Buddy3D camera. Requires 6x 10x5x2mm neodymium magnets, and uses the ¼" bolt from the “foot” that comes in the box with the camera, so no…
P
Printables
CPU Cooler Face Plate (Deepcool AG400/MAX)
This 3D model is a custom-designed top cover/faceplate for the Deepcool AG400 and AG400 MAX CPU air coolers. It fits securely over the top of the heatsink while maintaining full airflow and fan performance. Features: Precision-fit…
P
Printables
HP G4 mountable dock case
Hardware needed: Four screws: 10mm head and 5mm shank diameter (Wall mounting: Wall plugs) I printed it in PLA with 4 walls and 30% infill, feels rock solid.
P
Printables
Unifi G4-Pro screw mount
For those who have lost their G4-Pro Unifi camera screw mount, here's your replacement. Print it with supports, 30% or more infill should do. Also, PETG for longevity.
P
Printables
Repair plastic for stock KuKirin G4 foot
add some solidol/lithol inside so that it does not jam the spring P.S: I recommend drilling to 6 mm and using M6x25 screws and accordingly nuts
P
Printables
PG42 Blind Stuffing-Adapter to 5xPG9 Cable Gland/ PG42 Blindstopfen-Adapter auf 5xPG9-Kabelverschraubung
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
P
Printables
Mouse case for TeeVolution Terra PRO; Logitech G603; Logitech G703; Logitech G403 Wireless
Mouse case consists of base and cover. Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN PLACE Test…
P
Printables
LED G4 Light Fixture
I designed these holder / fixtures for G4 12VDC LED automobile dome lights. Print using PETG for best results. The retainer ring snaps into place firmly holding the LED inside. Solder the wire leads before snapping the ring in place. The…
P
Printables
Logitech G403 G603 G703 mouse wheel scroll fix
Some Logitech mice are known to develop scroll wheel issues over time. The pin/rod that rotates the scrolling mechanism inside gets worn out after a while and starts skipping. I used to buy replacement wheels online but they also tend to…
P
Printables
Fractal 75 Whoop Drone Battery Shim / Spacer for HappyModel CrazybeeG473
The CrazybeeG473 is Happymodel's latest AIO FC for whoops. It will NOT fit on the Fractal 75 frame because the VTX antenna hits the frame. You can install it with the JST port facing down, but it will hit the battery. I designed a simple…
P
Printables
Ubiquiti Doorbell G4 Pro (Wifi) mounting base plate for gang boxes
Mounting plate for putting the Ubiquiti G4 Doorbell Pro (Wifi) and Angled Base Over a Gang Box Where I live (Germany) it's quite common to not only have a hole with a cable where your doorbell goes, we often have gang boxes…
P
Printables
KuKirin G4/G2 keychain
Settings for 0.4mm nozzle: First layer height: 0.14mm Layer height: 0.1mm Layer width: 0.36mm Nozzle temp (for PLA): 200C Nozzle temp (for PETG): 235C Bed temp: 65C Recommended using 0.4mm nozzle or smaller. This keychain doesn't have the…
P
Printables
Gewehr G43 Sniper Rifle – 1:1 Scale Replica / Prop
Requirements : Tree Supports Glue (PS >The Prop is Scaled down so it can be easier to print for keychains or a smaller version of itself . If you want the full size as the real G43 Sniper, the prop needs to be SCALED 1000%) Available…
P
Printables
Meltem G4 compatible Cover for Ceiling Fan (Bathroom)
This is a compatible model for the meltem g4 series ceiling fan, commonly used in bathrooms to ventilate the humid air out of the room. On our original cover, the plastic clips broke after many years.. so I decided to quickly model the…
P
Printables
Magnum plus hotend toolhead for ratrig4.0 & 4.1
Magnum Plus Hotend Toolhead for RatRig4.0 & 4.1 Since Disrupt has not been officially released, I designed this as an independent model based on reference photos. Only three sheet metal parts need to be fabricated, so the production cost…
P
Printables
Reviung41 Sandwich Case
This is a sandwich case for the Reviung41 keyboard . The case is in three pieces: the top half (including the switch plate), the bottom half, and a triangular diffuser that sits inside the top, over the central LED. The hardware required…
P
Printables
MG4 EV (2026) Center Console Tray
Adaptation of MintyTrebor's excellent model for the MGS5 to fit the new 2026 MG4. I also needed rear cable exits so have added a model with these too. Printed in PETG, 0.4mm nozzle, 0.2mm layer height, tree supports. Happily the reduced…
P
Printables
Back Seat Cubby Mat for MG4 2026
TPU mat for the back seat cubby hole in the center console of the 2026 MG4 to reduce things sliding around. FreeCAD file included in case you need to tweak anything. Printed in TPU, 0.4mm nozzle, 0.2mm layer height, no supports.
P
Printables
MG4 2026 Back Seat Light Fitting
Mount to fit readily available battery powered LED lights (e.g. https://www.amazon.co.uk/dp/B0CSFTQ5L7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ) to the back seat grab handles of the 2026 MG4. The lights can either friction fit, or you can…
P
Printables
UWELL G4 Sleeve
I recently acquired a new UWELL G4 vape and I wanted a simple sleeve like that one I made for my G3. Print Settings Nozzle: 0.4mm Material: TPU (It may not work with solid material since I leverage TPU flexibility for a snug fit) Support:…
P
Printables
Kukirin G4 Rear Fender
Already tested and working 200+ kilometers - Upper part with reflector (PLA material) If this fender lasts 200 kilometers without any damage, then I will update this description to already tested and working. ;-) You can choose from two…
P
Printables
Led cover AOC Q27G41ZDF
cover for the power led of the monitor. It might work on other aoc monitors which also have their led in the center. Happy printing >-<
P
Printables
G42 magazine catch
Two versions - one is tighter than the other. Can't remember which is which so print both and see which one you like better. Recommend PLA+ or better and 100% infill
P
Printables
Push button for Scarlett SC-MG45M26
Dimensions are correct but model can be a bit too big depending on printer Recommend printing at 98%
P
Printables
EG4 1200xp air filter
My EG4 1200xp solar inverter is in a dusty environment which isn't good and can shorten the life of this equipment. This enclosure allows me to use Toyota cabin air filter to keep the cooling air entering my 1200xp clean. Two enclosures…
P
Printables
Kirby G4 Hose Adapter for Bauer Hose
Introducing my first 3D upload. An attachment designed for the Kirby G4 vacuum, specifically to connect it to the Bauer Premium Auto detailing accessory. Please note: the hinges may be fragile, as they broke when I applied too much…
P
Printables
Ubiquiti UBNT Magnetic G4 Instant Camera Stand
Magnetic camera stand for Ubiquiti G4 Instant wireless camera. I needed a camera stand that would let me move the camera around the house when we are using it for monitoring our pets remotely. Now I can put it anywhere and just plug it…
P
Printables
ESP32 Cam mount for G4 RF1 c for AI on the edge with reflection prevention
I tried out multiple models to mount my ESP32-Cam to my gasmeter. All of them had the issue that the LED on the ESP32 caused reflections on the glass of the gasmeter, which resulted in poor detection by AI on the edge . You can make all…
P
Printables
Updated - Unifi G4 Doorbell Pro - Ubiquiti Siding Mount
Updated (April 2026): I have updated the file as I cleaned it up and made some slight modifications (thichness, wire opening). V1 and V2 are the same width and heigh but the back is slightly different to try to stay flush to my siding.…
P
Printables
HP PRODESK G4 Mini mounting bracket
I used wood screws and mounted it directly to the wooden board. Power supply uses similar bracket. Also cables are held up with zip ties using this easy print: https://www.printables.com/model/205265-cable-management-easy-solution
P
Printables
Align Trex 450 anti-rotation + Matek G474-Heli case (Rotorflight)
I have created this Align Trex 450 anti-rotation platform with integrated Matek G474-Heli case (Rotorflight). Let me know if you have any suggestions to improve my design or have any questions, let me know in the comments. Thanks :)…
P
Printables
10" 1U Rack Mount for HP ProDesk Mini G4
10" rackmount for the HP ProDesk Mini G4. Prints without supports when placed front face down.
P
Printables
Bambu Lab P1 magnetic light 4x G4 LED lamp
There are plenty of light mods for this printer, but most of them use LED strips. I had some G4 LED modules laying around and wanted to make use of them. BOM: 4 pcs. 12V G4-size LED modules Ø23 mm (mine have 3W of power, more than…
P
Printables
Underware - HP G4 Dock & Power Brick Loops
Another Underware/Multiboard under desk solution. This time to hold my HP G4 Dock and power brick.
P
Printables
Hp Elitedesk 800 G4 + Power supply + Seagate Expansion HDD holder for home server
Hi, I've done this holder for my "Home Server" to have a mini pc HP EliteDesk 800 G4, a power supply and a Seagate Expansion hard disk drive of 6Tb, to have everything on the same place and have a better airflow. Print settings: 0.20 of…
P
Printables
Frontier FOG421 ONT Router Bracket for SMC Structured Media Cabinets
SMC bracket for mounting a Frontier GPON ONT model FOG421 into common Structured Media Cabinets. This includes printed mounting tabs for hanging the device, so no screws are necessary to be added after printing. Use the appropriate…
P
Printables
Frontier FOG421 ONT Router Bracket for SMC Structured Media Cabinets
SMC bracket for mounting a Frontier GPON ONT model FOG421 into common Structured Media Cabinets. This includes printed mounting tabs for hanging the device, so no screws are necessary to be added after printing. Use the appropriate…
P
Printables
Anbernic RG45XX Handheld Wallmount
Printed on its back for a faster print. Supports recommended.
P
Printables
Anbernic RG40XX V - Skadis Mount
A mount for the RG40XX V for the IKEA Skadis Pegboard with a neat Anbernic logo on the side
P
Printables
Ubiquiti Unifi - G5 G4 G3 Bullet Camera Single Gang Wall Plate Mount with Weep Holes
Additional Description This Is A Remixed From g3 flex mount with appropriate Mount hole spacing and upgraded water weeping channels. This plate will fit an existing Single Gang US Low voltage or enclosed wall mount box. HIGHLY Advised to…
P
Printables
UniFi Protect G4 Instant mounting brackets and disc
Original model is available via onShape at https://cad.onshape.com/documents/2110b151db16d7971ee64079/w/30b9b712fbf436134d02c1b7/e/4f9122a2e5d5dac4fc8b7290
P
Printables
Mitsubishi G4M1 kit card
can be printed together the model needs to be glued together or separately in other colours the Mitsubishi G4M1 is very realistic Print in place kit card , Assembly required need to use a support
P
Printables
GoTrax G4 Replacement Rear Fender
Replacement shortened rear fender for GoTrax G4. Includes attachment point for folding clip bracket from original fender, with slotted screw feature in case one screw is seized and can't be removed (as in my case). Included OBJ, STL, STEP.
P
Printables
Motorola G4 Play Static Stand
Motorola G4 Play Static Stand for my app, Partner Portal https://github.com/regulad/PartnerPortal Be careful after inserting your device, if you use PLA you may need to pry the sides a little to get the phone to sit inside. To release…
P
Printables
Gotrax G4 /Max Console Trim
Trim piece for the Gotrax G4 and Max center console. Print in the orientation modeled for the best finish on the visible surfaces. You will need supports. Tree supports will come off easier, but standard supports work too.
P
Printables
iMac G3 / Powerbook G4 / G4 Cube slimline Optical Drive adapter - Remix
This is remix of the original bracket to accommodate a wider IDE drive optical board. Theoretically, it should still work with the slimmer IDE boards too. The original designer has stated that the original design will work with the IMac…
P
Printables
Ubiqiti G4 Instant Vertical Stand
Vertical stand for the Ubiqiti G4 Instant. It uses the included adheasive and wall mount to secure it to the stand. onshape: https://cad.onshape.com/documents/f70a2de22527961ceee11555/w/60c64aa6690a55d3a0949aab/e/feb026e59b50d9787c273824
P
Printables
Kukirin G4 shock absorber hole plug
If you had to take apart the front/rear shock absorbers, you know that the holes to release the shock absorber are just covered with a sticker and re-sticking is not possible without glue, so I made a simple hole cover. Printed with PETG…
P
Printables
Kukirin G4 stand support
The stand on the Kukirin G4 has no support and in the unsupported position it can slightly flop up and down and when you drive on a bumpy road the rear part of the stand always hits the lower part of the scooter's body. (and that makes…
P
Printables
HP EliteDesk 800 G4 SFF - 3.5" HDD Caddy/Mount
This is a toolless caddy/mount for a 3.5 inch HDD in an HP EliteDesk 800 G4 SFF ( no hardware required ). This mount should fit almost all 3.5 inch HDD and should also work in other HP EliteDesk and ProDesk computers. It is meant to…
P
Printables
MG4 EV 6.5" front door speaker adapter
An adapter to fit an aftermarket 6.5" speaker into the front door of your MG4 EV. I used a Polk speaker but I believe the hole spacing is fairly universal. The holes are 155mm centre to centre across. I have included cutouts for the…
P
Printables
Bessey TG4.5 Series Bar Clamp Pads PN 3101395
I bought some Bessey TG4.540 clamps from the HD and it took maybe an hour after bringing them home before I lost one of the @#$% pads. No problem I figure, Bessey offers replacement pads and I can probably just pick some up from The Big…
P
Printables
Anbernic RG40XXV Stand (3 Variants)
A simple stand base for the Anbernic RG40XXV. (3 variants: simple, "RG40XXV" inset text, "RG40XXV" outset text). In the picture you can see it printed in White PETG (PLA works too), 0.15mm layer height (you can go higher but you will get…
P
Printables
G4 Pro Doorbell Extender
My unifi G4 pro doorbell did not quite fit in the width between the edge of the house and the edge of the front door. I needed a simple extension bracket & I did not see any here that fit my needs so I made this. This is a 70mm extension.…
P
Printables
hp zbook x2 g4 rugged transport box
hp zbook x2 g4 rugged transport box with TPU shock absorbers.
P
Printables
HP ProDesk 600 G4 2.5 HDD/SSD Frame
I created this frame to hold an 2.5 Inch SSD. The frame simply holds on to the existing screws. I can recommend this cable: https://de.aliexpress.com/item/1005006379328635.html Feel free to create a custom copy for yourself:…
P
Printables
Prusa XL Enclosure with gas struts Unifi G3/G4 instant camera mount
I installed the gas struts mod for the Prusa XL enclosure and the existing camera mount wouldn't work. It also wouldn't mount in the top hole. It was modeled from scratch but inspired by Robert's design. Printed with a .4mm nozzle and…
P
Printables
Phone charger and holder Apple iMac G4 Style
Print with any materials that you want using the parameter suggested from filament producer. I suggest to use a 0.4mm nozzle and support needed
P
Printables
Avoalre G45 light bulb chain fence board hook holder
Fence board hook light bulb chain holder for Avoalre G45 . I made two versions of this model, front and rear if you like. Because my right lamp chain have hooks in other side and i don't wanna combine with this and do mess with cable.
P
Printables
ESP32 gas meter adapter G4 RF1
This is a copy from my Thingiverse thing 4785777. ------------------- This is an adapter forhttps://www.prusaprinters.org/prints/107990-esp32-water-meter-adapter to use it with a gas meter. It is intended to use with jomjols great…
P
Printables
Prusa XL Camera Mount for Ubiquity Unifi g4 flex
WARNING - I DO NOT KNOW IF THE ENVIROMENT INSIDE A CLOSED ENCLOSURE IS OK FOR THE g4 FLEX. LET ME KNOW IF ITS A PROBLEM. You need 3 x 3mm screws and nuts, a single 4mm screw and nut (I used a locking nut) and the correct SAE screw to hold…
P
Printables
iMac G4 Neck / Arm Opening Tool
While there are a number of tools and methods posted online on how to open this, I didn't have easy access to any of them so I designed a simple tool. This acts as a screwdriver handle for three 4mm hex bits (such as what come from an…
P
Printables
OMG4
1. Description After seeing the different creations allowing chasing at 300kmh, I also wanted to create a more aerodynamic machine in order to reach 200km/h more modestly but in 4" light. The basic goal was to stay below 250g, but it is…
P
Printables
Apator Metrix G4 Gas Meter for Aqara (MCCGQ11LM)
Simple clip-on box for Aqara door sensor to measure the impulses by REED sensor from gas meter. You have to unsolder the REED sensor and use extension cables to connect it back to the board. Works perfectly.
P
Printables
Anbernic RG40xxH Grip Case
This is a (hacked together) RG 40xxH Grip Case. I am very new at this and basically took the TrimUI Smart Pro grip case (with permission received via DM) by @dildesigns and reshaped the inside to fit the 40xxH. The original grip case by…
P
Printables
MG4 Tweeter Bracket and Mount
LHS/RHS mirrored tweeter brackets for the MG4 EV, and a Tweeter cup to hold a commonly available tweeter (Hertz Uno).
P
Printables
IKEA IVAR Keyboard stand for LG G413SE
I've created this extension to the IKEA IVAR shelf. In order to have a dedicated place to store my keyboard (LG G413SE) when the IVAR table was folded. The stand consists of 2 main parts. Both of which are held in place using circular…