3-Inch Toothpick Drone Frame v8 — Sub-250 g, GEPRC Taker G4 + RP3 Covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3-inch toothpick drone frame v8 with GEPRC Taker G4 and RP3 covers. 164 g build, prints in PETG with no supports.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
What it is
The printed airframe from Phase 1 of Project Cheap Drone: a 3-inch toothpick quad that weighs 164 g all-up. That is under 250 g, so it does not need FAA registration. Flown line of sight.
In this download
Frame v8: body, arms, legs and mounts
Flight controller cover: fits the GEPRC Taker G4 AIO
Receiver cover: fits the RadioMaster RP3 ELRS Nano
Print settings
PETG · 0.25 mm layers · 50% infill · 3 perimeters · no supports. ASA was too flexible and the legs snapped.
Built around
Flight controller + ESC: GEPRC Taker G4 45A AIO, 25.5 mm M2, on rubber grommets (exact board on GetFPV)
Motors: iFlight XING2 1404 3800KV
Props: Gemfan Hurricane 3016 (3-inch = prop size)
Battery: OVONIC 4S 650 mAh, XT30
Receiver: RadioMaster RP3 ELRS Nano (2.4 GHz)
Screws
Motors: M2 × 6 mm. Not M2 × 8: a longer screw can hit the motor windings and short it.
Props: M2 × 8 mm.
Heads up
Cable routing works but is not tidy. v9 will fix it.
The legs are springy on purpose. The first rigid set snapped.
Check your prop arcs before the first spin-up.
First power-up: use a smoke stopper, and charge LiPos in a fireproof bag or box.
Parts I modeled for this build
Parts list
Amazon links are affiliate links.
Flight controller and ESC: GEPRC Taker G4 35A AIO (the version Amazon carries; this build used the 45A)
Receiver: RadioMaster RP3 ELRS Nano
Transmitter: RadioMaster Pocket (ELRS)
Transmitter batteries: 3400 mAh NiMH button-top (2-pack)
Flight battery: OVONIC 4S 650 mAh XT30 LiPo (4-pack)
Propellers: Gemfan Hurricane 3016 (16 pcs)
Smoke stopper: VIFLY ShortSaver V2
Charger: ToolkitRC M6AC 300W
Balance board: JST-XH 2-6S LiPo charge adapter (2-pack)
LiPo safety box: Bat-Safe Mini
Watch the build
Credits
Motor and receiver models by Riley Entropy: XING2 1404 · RP3 ELRS RX. Please like their work.
Modeled in
Shapr3D (affiliate)
License
CC BY 4.0. Use it, remix it, share it, sell it. Just credit @shreyashgupta.
Changelog
v8 (August 2026): battery on top, electronics underneath, capacitor channel, springy legs.
Disclosure
I am a Shapr3D Creator Partner and an Amazon Associate. I earn from qualifying purchases at no extra cost to you.