P
PrintablesIzlud
Radiomaster Pocket Gimbal Protection
If you want to preserve the thread of your sticks : print this model !
- Downloads
- 1,273
- Likes
- 117
- Rating
- 5
Search results: radiomaster
301 models
P
PrintablesVoltex
Improved Radiomaster TX16S Gimbal Protector
I didn't like any of the available Designs for Gimbal Protectors already uploaded on Thingiverse so I decided to design my own improved version. Some Key Features I found important: Both Gimbal Protectors connected in the middle, no…
- Downloads
- 1,109
- Likes
- 68
- Rating
- 5
P
PrintablesHandsomePotato
Radiomaster zorro gimbal protector
I really like the zorro, but I needed something to protect the gimbals in my bag. So I whipped this together. It's a simple gimbal protector for the radiomaster zorro. Rotate 180 (print upside down) in your slicer to print without…
- Downloads
- 1,090
- Likes
- 44
- Rating
- 4.64
P
PrintablesSeii-FPV
Seii-Radiomaster Boxer Antenna mod adapter v7 PETG
Seii-Radiomaster_Boxer_Antenna_mod_adapter_v7_PETG - I took Bikernickmn's model and just polished that widest square piece because it was damaged in the original file. Also, whole file is not properly centered by the original author and…
- Downloads
- 997
- Likes
- 37
- Rating
- 5
P
PrintablesYeetForSpeed Overground
Radiomaster Pocket Gimbal Spacer Lowered Gimbals
🌟 Unleash Comfort: Radiomaster Pocket Gimbal Spacer Installation! 🌟 Ahoy, fellow aviators! Since embracing the Radiomaster Pocket, I've been soaring through the skies with joy. However, a tiny hiccup emerged – the thumb position felt a…
- Downloads
- 910
- Likes
- 139
- Rating
- 5
P
PrintablesTheDirtyGherkin
Radiomaster Pocket - SA/SD Switch cover
Changes the Pocket to have Zorro switches on the SA and SD buttons. This files replaces the Pocket SA and SD switches with blanking plates. A hole is in the model for the Zorro RadioMaster switches that can be purchased as spares.…
- Downloads
- 707
- Likes
- 51
- Rating
- 4.5
P
PrintablesspectrexFPV
![RadioMaster Gimbal Stick Ends Set [New Updates]](https://media.printables.com/media/prints/741238/images/5788896_f9cd2b07-b027-47cd-9465-108f1249f600_c4f332b0-8864-4efc-9d9f-87f366e5fcc9/20240128_080743.jpg)
RadioMaster Gimbal Stick Ends Set [New Updates]
RadioMaster Gimbal Stick Ends Set Unless specified and/or for heat set inserts, all stick ends are designed for flexible materials. i.e. TPU, TPE, etc. In case you need some clarification: M3: Radiomaster Pocket, Zorro, TX12 Jumper T20,…
- Downloads
- 674
- Likes
- 42
- Rating
- 5
P
PrintablesspectrexFPV
Radiomaster TX15/TX15 Max Gimbal Stick Protector
What should've come with the radio... Features Fits both stock (10mm) and wider stick ends up to 16mm in diameter Full protection on toggles and dials Anti accidental power-on Customisable name plate area Recommended Print Settings…
- Downloads
- 667
- Likes
- 30
- Rating
- 5
P
PrintablesefficientAF
Radiomaster Pocket: Grip Covers
I needed something to make it easier for me to find a comfortable grip for the Radiomaster Pocket so I made these. Currently I have the no stick holder version available but I'll post other versions with the stick holders. I wouldn't…
- Downloads
- 601
- Likes
- 83
- Rating
- 5
P
PrintablesZakoplex
Radiomaster Pocket screen mount for Emax Transporter 2 FPV drone goggle monitor
Radiomaster Pocket screen mount for Emax Transporter 2 FPV drone goggle monitor. Wanted to be able to use it on my radio as the goggles done work with my eyes. Screen attaches with a standard ¼" tread 5/8" machine screw. See the attached…
- Downloads
- 595
- Likes
- 63
- Rating
- 5
P
PrintablesDanol
Radiomaster Pocket case
2026-03-09: Added a larger variant with a compartment for the strap. Supportless print, you will need two M2x16 screws and nuts for the hinge. Based on my parametric case model .
- Downloads
- 539
- Likes
- 73
- Rating
- 5
P
PrintablesCybuster
Radiomaster TX12 Guards v2
Gimbals and Screen protector for Radiomaster TX12. Added - bridge between the Gimbals Guard - 2 x Antenna mount Recommend TPU-95A. PLA/PETG also works. No support needed
- Downloads
- 536
- Likes
- 42
- Rating
- 5
P
PrintablesKubiV
Radiomaster BOXER Gimbal Protection
Protection For Radiomaster BOXER Controller Gimbals
- Downloads
- 526
- Likes
- 33
- Rating
- 5
P
PrintablesDaniel S
Radiomaster Zorro Case
Case for the Radiomaster Zorro without external module. -Place supports under the latch part of the case! -Hinge: M3x48 screw and M3 Nyloc nut -Latch: instructions->link remixed from roadie3rd https://www.thingiverse.com/thing:2425378
- Downloads
- 476
- Likes
- 35
- Rating
- 4
P
PrintablesBarrabajo_
Radiomaster pocket IKEA SKADIS mount
This is a mount designed for the radiomaster pocket. It has two hooks in the backside. It fits and slides perfectly into the pegboard. The controller is snugly secured into place and easy to get it in and out.
- Downloads
- 439
- Likes
- 73
- Rating
- 5
P
PrintablesThe Duck Vault
RadioMaster Pocket 7" Monitor Mount
RadioMaster Pocket Screen Mount This project is proudly sponsored by PCBWay - Your One-Stop Solution for PCB and 3D Printing Services As an FPV enthusiast, I'm excited to share my enhanced version of the RadioMaster Pocket screen mount.…
- Downloads
- 439
- Likes
- 25
- Rating
- 0
P
PrintablesQrome
Radiomaster TX16s Gimbal Covers
Joined gimbal covers for the Radiomaster TX16s radio. These are printed in PLA with a color stop part way. Black Hatchbox PLA: https://amzn.to/3sOiSnG Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
- Downloads
- 429
- Likes
- 43
- Rating
- 5
P
PrintablesBrandoN3D
Radiomaster TX12 Battery Lid
My battery lid snapped at the hinge nubs. So I modeled this! It sits slightly below surface of controller for easy printing on a flat surface. To install, put one nub into the controller and bend the lid inwards so that the other nub can…
- Downloads
- 410
- Likes
- 10
- Rating
- 0
P
PrintablesAnthonyH
Radiomaster RP4TD receiver mount
I created this small holder/mount for the Radiomaster RP4TD receiver. It just slides in and stays via friction. If loose just add a dab of hot glue or similar to the edge of the receiver. I print in ASA .4mm nozzle and .2mm layer height.…
- Downloads
- 341
- Likes
- 14
- Rating
- 5
P
PrintablesAnton
Radiomaster TX16S gimbal protection EZ to print
Did not like what I saw on thingiverse. 3D printers don't print very nice in the air, especially when you want ABS, HIPS, ASA, anything other than PLA, so I designed my own, where you can print it out of separate pieces and assemble it…
- Downloads
- 334
- Likes
- 14
- Rating
- 5
P
Printablesfredericus
Radiomaster Pocket Phone Holder
This is a phone/screen mount for the Radiomaster Pocket, inspired by a mount on the market at AliExpress at an unspeakable price. It requires: 1x M3x8 (or bigger as far as M5) 1x M3 nut (or bigger as far as M5) (optional) 1x M3 washer (or…
- Downloads
- 334
- Likes
- 23
- Rating
- 2
P
Printablespiero menetti
Radiomaster TX16S gimbal and sticks protection NEW!
Protect gimbals and front sticks. New version with upper stick protection! Assembly the two parts with pressure, once in right position the upper part rotates freely. Insert the gimbal protection first, then rotate the other part: on the…
- Downloads
- 331
- Likes
- 29
- Rating
- 0
P
Printablesgrizzie17
Gimbal Protectors for Radiomaster TX16S
Gimbal Protector for the Radiomaster TX16S I have larger Gimbal Stick-Ends than the stock stick-ends. I wanted a Gimbal Protector that would fit over those but also fit in the Radiomaster TX16S case (the one that comes with the…
- Downloads
- 321
- Likes
- 17
- Rating
- 4
P
Printablesdg fpv
radiomaster boxer - pocket antenna mod v2 (updated)
buymeacoffee.com/dgfpv Push the pin out of the original hinge and swap it with the 3d printed one. Unscrew the sma adapter. The inner counterpart needs to be glued to the inside - from inside of the to the outer bracket. Be very careful…
- Downloads
- 314
- Likes
- 31
- Rating
- 0
P
Printableslukefpv
Backpack for Radiomaster Pocket
Storage compartment for custom sticks or small things - securely attaches to the extension mod bay of the RM pocket. Update: Added @wengacz_2735054 's double chamfer Remix
- Downloads
- 284
- Likes
- 51
- Rating
- 5
P
PrintablesDaniel Düsentrieb
Radiomaster zorro gimbal protector
This a Remix of the design of @HandsomePotato The middle part is reinforced
- Downloads
- 283
- Likes
- 15
- Rating
- 5
P
PrintablesAlex
Radiomaster Pocket - SA/SD Switch cover
Printed with the fin
- Downloads
- 270
- Likes
- 38
- Rating
- 4.67
P
PrintablesRonny Sandslett
Quick mount mobile holder for the Radiomaster TX16s
Quick mount mobile holder for the Radiomaster TX16s. Holds a mobile phone or similar (63 - apx. 90mm width) for use with Qgroundcontrol and Ardupilot or similar. Hardware: 1pcs apx. 60mm long 4.5mm (max 5mm) spring in tension. 1pcs…
- Downloads
- 269
- Likes
- 39
- Rating
- 0
P
PrintablesLenny B FPV
!UPDATED!: V2 Radiomaster Tx16s Gimbal protector (normal & AG01)
!UPDATED!: V2 Radiomaster Tx16s Gimbal protector (also fits for AG01 gimbals) Combined and Single Version Perfect fit with all Materials. I used PLA Please like if you downloaded it :-)
- Downloads
- 264
- Likes
- 16
- Rating
- 3
P
Printablesmaxedout22
Radiomaster TX16S MKII Printable Case
I've been looking for a good box for my TX16S for some time. Either very expensive or just simple polystyrene. Here is my own box. Very easy to print, Rock Solid and Perfect Fit!!! I do not use the internal module. Therefore no fixed…
- Downloads
- 261
- Likes
- 26
- Rating
- 5
P
PrintablesAirwaves Ted
Radiomaster TX16s Stick protector.
Yet another transmitter stick protector model! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm or better Infill: 5% - 10% Category: R/C Vehicles
- Downloads
- 251
- Likes
- 14
- Rating
- 5
P
Printablesuser01
Radiomaster Boxer Low Profile Antenna Mod
ufl T-antenna from a happymodel ep1 receiver. youll need to unscrew the PCB to remove the rp-sma connector for this mod. printed in tpu with support added a version without support. its not as slim
- Downloads
- 251
- Likes
- 17
- Rating
- 5
P
PrintablesBopChong
Radiomaster Pocket Gimbal Cover
EDIT: I've added a new version with enclosed tops to help stop crumbs and dust. Bonus: Texture :) Remix to accomodate for my sticks - 24mm x 10mm - height increased by 3.5mm and holes increased 2.2mm. Cross-bar widened to allow more space…
- Downloads
- 249
- Likes
- 32
- Rating
- 4.67
P
Printablesor10n
Radiomaster Boxer foldable antenna
To install that mod, you need to open the radio and unscrew the original antenna. mount and mount-plug needs to be glued after mount to the holder inside radio. You may use this instruction as a reference: Materials 1x Foxeer ELRS 2.4GHz…
- Downloads
- 246
- Likes
- 29
- Rating
- 5
P
PrintablesJakob G.
Longer Sticks for Radiomaster Pocket
I printed them with 0,08 mm layer height for better details. You may have to add a brim to prevent the objects from falling over during printing. The screw is a M3x15 (ISO7045) - you can get this screw at every hardware store.
- Downloads
- 244
- Likes
- 34
- Rating
- 5
P
PrintablesAerialFox
TPU Gimbal Protector Radiomaster TX15
Might look like the protector from the RM Boxer but is constructructed for the new RM TX15.
- Downloads
- 242
- Likes
- 14
- Rating
- 0
P
PrintablesViper Worx
Radiomaster Pocket Gimbal Protector
Remix of https://www.printables.com/model/569384-radiomaster-pocket-gimbal-protection - Designed from the ground up using dimensions taken from the STL in Orca Slicer. Remix features larger Stick holes (10mm) for custom Sticks and a…
- Downloads
- 239
- Likes
- 16
- Rating
- 4.75
P
PrintablesmamaxONE
Wall mount for radiomaster pocket
Here's a wall mount for the Radiomaster Pocket radio controller. I was inspired by another model and after printing it out, I realized that it worked really well. So I'm offering it to you for those who own this great radio controller.…
- Downloads
- 236
- Likes
- 29
- Rating
- 5
P
PrintablesDurahl
FrSky Horus X12S - Radiomaster TX16 IPS Touchscreen Backing Plate
EdgeTX , a modified Firmware and a Radiomaster TX16 touch enabled screen make it possible for the FrSky Horus X12S radio transmitter to also have touch functionality. The increased thickness of the touch enabled screen though makes it…
- Downloads
- 226
- Likes
- 6
- Rating
- 5
P
PrintablesLeif
Radiomaster Boxer Holder for Ikea Skadis
I've designed an Ikea Skadis holder for the Radio Master Boxer Radio Controller. It has 10 hooks on the back which should give it a very secure fit. The front / sides are designed in a way that everything is visible, but it's still secure…
- Downloads
- 226
- Likes
- 30
- Rating
- 5
P
PrintablesMr4th
Radiomaster TX16S gimbal stick (M4)
Sticks for TX16S M4 (no threads). Good grip for hybrid/pinch style. You are welcome to remix.
- Downloads
- 226
- Likes
- 17
- Rating
- 0
P
PrintablesFailsafe-FPV
FPV DISPLAY MOUNT/BRACKET FOR RADIOMASTER BOXER
FPV DISPLAY MOUNT/BRACKET FOR RADIOMASTER BOXER BEST THING TO HAPPEN TO FPV SINCE THE INVENTION OF LIPO CELLS Allows to mount a HDMI 1080p display Fits in the original radiomaster boxer carrying case - no disassembly required Easy…
- Downloads
- 215
- Likes
- 23
- Rating
- 0
P
Printablesbsprange
Radiomaster RP1 RP3 20mm drone side antenna
Side antenna mount for Radiomaster RP1 or RP3 antenna. Fits onto any 20mm standoff See my other uploads for a front mounted antenna holder. Printed in TPU
- Downloads
- 215
- Likes
- 15
- Rating
- 0
P
PrintablesJakub Moskwa
Radiomaster Pocket Stand
A practical stand designed for the Radiomaster Pocket FPV controller. This holder keeps your controller secure and easily accessible while protecting it from damage when not in use. Features: - Custom fit for Radiomaster Pocket - Stable…
- Downloads
- 212
- Likes
- 22
- Rating
- 5
P
PrintablesEldenroot
Radiomaster TX16S MKI/MKII gimbal protection
Gimbal protector for Radiomaster TX16S (MKI or MKII) / Jumper T16 radio (should work, not tested). Protector is from a one piece with a grip for easier removing. LED charging indicator is fully visible while the protection is on. Bigger…
- Downloads
- 212
- Likes
- 19
- Rating
- 4.33
P
PrintablesMegaCadler
Pulttray for Radiomaster TX16S
This is my Pult Tray for Radiomaster TX16S transmitter. The parts named "Aloy_..." shall not be printed but rather made of Aluminium for best robustness. The Leather Applications are not required but make it comfortable and look…
- Downloads
- 211
- Likes
- 20
- Rating
- 0
P
PrintablesKlaasYK
Radiomaster Pocket Stick ends
Alternative stick ends for the Radiomaster Pocket. Requires 2 M3x8 hex screws (on for each stick). Recommended to print with a brim, due to the small bottom area.
- Downloads
- 210
- Likes
- 21
- Rating
- 5
P
PrintablesCJ Davies
Radiomaster RP1 RP3 ExpressLRS receiver antenna mount
Basic mount for the T style 2.4GHz dipole antenna that comes with the Radiomaster RP1 & RP3 ExpressLRS receivers. This design uses M3 heat set inserts with a hole spacing of 29.5mm & is designed to mount flush against a 3mm thick piece of…
- Downloads
- 207
- Likes
- 7
- Rating
- 0
P
PrintablesAlfie Lockrey
Radiomaster Zorro 18650 Case/Holder - Nano Module Mount
This case holds a homemade 18650 battery pack and mounts to the nano module interface on the rear of the zorro. The pack can be easily removed for charging when needed and will easily power the radio for hours on end without using the…
- Downloads
- 204
- Likes
- 20
- Rating
- 5
P
PrintablesBurf
Radiomaster Boxer Folding Antenna
A low-profile, folding antenna for the Radiomaster Boxer that you can leave installed when you throw the radio in your bag! The antenna bolts on using the screw holes for the carry handle and can be installed without any disassembly of…
- Downloads
- 201
- Likes
- 65
- Rating
- 5
P
PrintablesOnkel Pierre
Radiomaster MT12 12mm Hex steering wheel adapter for 1/10th scale wheels
So far i'm really pleased with my Radiomaster MT12. However, i generally don’t appreciate the small steering wheels that are standard on most pistol style transmitters. So i designed a 12mm hex adapter shaped like a slotted and drilled…
- Downloads
- 199
- Likes
- 16
- Rating
- 0
P
PrintablesEXEN
Radiomaster Zorro 18650 battery mod with carry handle
I soldered 24awg PTFE wire to the batteries and ran them through the hole on the top of the radio. I kept the original 18350s in to keep it balanced. You can also use a small 90 degree usb-C adapter so you can still have access to the…
- Downloads
- 198
- Likes
- 28
- Rating
- 5
P
PrintablesP.I.Engineer
Radiomaster Pocket 2.4 ELRS antenna case
step file included with finishing fillets removed. go nuts rear cover is meant to be held on with dabs of glue.
- Downloads
- 196
- Likes
- 26
- Rating
- 5
P
PrintablesMerin Kumar SP
Radiomaster zorro screen and switch protector
A simple screen and switch protector for radiomaster zorro. This is my 1st cut but fits well.
- Downloads
- 192
- Likes
- 6
- Rating
- 0
P
PrintablesPlaty
Radiomaster Boxer Internal Antenna mod
Internal ELRS antenna mount for the Radiomaster Boxer using a simple 2.4Ghz EP1 T style Receiver antenna. Doesn't this ruin the range ? It's hard to quantify but you can expect a reasonable 10% drop in signal strength compared to an…
- Downloads
- 189
- Likes
- 18
- Rating
- 0
P
PrintablesCombinacijus
Radiomaster Pocket Hawkeye Monitor Mount 3.5 inch
Mount for Radiomaster Pocket and Hawkeye 3.5inch FPV monitor Requires screw (M3x12 works well) to fix monitor to mount. Mount snaps onto Pocket "To attach, put the bracket over the strap mount point on the centre or the radio at an angle.…
- Downloads
- 187
- Likes
- 13
- Rating
- 0
P
Printablesdandos23
Radiomaster Zorro handle
I wanted a small handle for my Radiomaster Zorro to make it easier to carry when it wasn't in its case. There are two versions, one with holes to screw into with some M2 bolts and one for threaded inserts to go in. Both versions need 2 x…
- Downloads
- 187
- Likes
- 24
- Rating
- 0
P
Printablesphilb59
Radiomaster TX16S Transmitter Tray
This transmitter tray is designed specifically for the Radiomaster TX16S with a folding handle. All parts were printed in PETG for outdoor use: Satin sheet and Kores application 0.4mm nozzle 240C nozzle temp 90C bed temp 15% infill…
- Downloads
- 185
- Likes
- 11
- Rating
- 0
P
PrintablesPlaty
Radiomaster Boxer Stick Cam Mount Collection
I couldn't find any design that fitted my needs and sat as flush as possible with the controller so I designed my own from scratch. Turns out declining it for Standard and foldable antennas was an easy job so I ended up with a whole…
- Downloads
- 182
- Likes
- 14
- Rating
- 0
P
PrintablesHandsomePotato
Radiomaster zorro 2s 18650 backpack
This is a backpack that houses a 2s 18650 pack and mounts to the zorro's nano module bay. I liked the original design of turnerd, but it had some flaws. It wouldn't fit when printed in a rigid material. I've extended the module adapter…
- Downloads
- 182
- Likes
- 17
- Rating
- 4.5
P
PrintablesTibor
Radiomaster BOXER Gimbal Protection for Five33 Ripsticks
Changed diameter of sticks so Five33 Ripsticks fit. Inner Diameter 17mm
- Downloads
- 181
- Likes
- 5
- Rating
- 0
P
Printableskoiiiak
Radiomaster Zorro gimbal protector
Gimbal protector for Radiomaster Zorro.
- Downloads
- 180
- Likes
- 8
- Rating
- 0
P
PrintablesMotti Shonak
Radiomaster TX16S case handle remix
I remix the original handle and put hole for screw and tightening nuts. Use a plug on one side of the handle for a good alignment
- Downloads
- 179
- Likes
- 29
- Rating
- 0
P
PrintablesMichael
RadioMaster ER6 ER8 Mounting Bracket
This bracket allows you to mount a ER6 or ER8 in places where double sided tape may not be reliable. An STL file is included If you want to tweak it using OpenSCAD: Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open…
- Downloads
- 178
- Likes
- 15
- Rating
- 5
P
PrintablesMagic Aerials
Tray for the Radiomaster DBR4 Receiver (Rekon 10 Pro)
This custom 3D-printed tray is designed to house the Radiomaster DBR4 receiver in the dead center of the Rekon 10 Pro frame , positioned just below the 30x30 flight stack. The tray fits securely in the battery strap section, maintaining…
- Downloads
- 176
- Likes
- 6
- Rating
- 0
P
PrintablesNordfpv
Radiomaster Boxer ELRS antenna mod
A modification to the boxer to have a much smaller ELRS antenna. This modification requires you to open the radio to change the internal connection. Any damage is solely responsibility of the person opening the radio. Installation…
- Downloads
- 173
- Likes
- 25
- Rating
- 0
P
PrintablesspectrexFPV
![Radiomaster Zorro Gimbal Protector [Updated]](https://media.printables.com/media/prints/656310/images/6383851_8a45bf32-86ee-4d20-b024-95f1a2401efc_51cd78fa-4a95-4015-a0c4-142f78991a0f/20240331_224750.jpg)
Radiomaster Zorro Gimbal Protector [Updated]
RadioMaster Zorro Gimbal/Stick Protector [Updated: 31/03/2024] Features [31/03/2024] Updated Now fits stick ends diameter up to 15mm ± 1mm Get the same stick ends from this stick ends set Clamp dimensions Bridging edges and connections…
- Downloads
- 172
- Likes
- 10
- Rating
- 5
P
PrintablesMike Tan
FLIP - Foldable OLED Screen for the Radiomaster Pocket
Build info at - https://bit.ly/flippocket Product brochure at - https://flip4pocket.tiiny.site
- Downloads
- 170
- Likes
- 39
- Rating
- 0
P
PrintablesTheRealJocki
Radiomaster TX16S Pult faltbar | Console foldable
Die Pultbasis wird mit dem Rückteil des Senders verschraubt. Ich habe hierfür M3-Einschmelzmuttern in den Druckteilen verwendet. Der Sender muss zur Montage geöffnet werden (4 Schrauben hinten, 2 bei der Antenne) - Anleitung als…
- Downloads
- 169
- Likes
- 16
- Rating
- 0
P
PrintablesRACBOTS
Soporte Monitor FPV Para Control Radiomaster Pocket - FPV Monitor Support For Radiomaster Pocket Control
Soporte monitor FPV para control Radiomaster Pocket, diseñado para sujetar con tornillos M2 de 8mm de largo. Especificaciones: La pieza puede ser impresa en filamento duro como PLA, ABS o PET, pero también se pueden imprimir en filamento…
- Downloads
- 168
- Likes
- 27
- Rating
- 0
P
Printableslucpolak
Radiomaster TX16S MK3 MAX Gimbal Protector
Gimbal protector designed for the brand new Radiomaster TX16S MK3 . Tested and validated on the MAX version . This accessory helps protect your gimbals during transport and storage, preventing unwanted movement and potential damage. 📦…
- Downloads
- 164
- Likes
- 7
- Rating
- 5
P
PrintablesRiley Entropy
Radiomaster RP3 ELRS RX
Note that this module features antenna diversity, not true diversity. Credit for the excellent Radiomaster dipole antenna model goes to Silas Tvingsholm on Grabcad. Keep in mind that these antennas may be different from the ones you…
- Downloads
- 163
- Likes
- 7
- Rating
- 0
P
PrintablesFailsafe-FPV
OpenIPC RubyFPV VRX WITH DISPLAY AND BRACKET FOR RADIOMASTER BOXER
OpenIPC RubyFPV VRX WITH DISPLAY AND BRACKET FOR RADIOMASTER BOXER Allows to mount a HDMI 1080p display Fits in the original radiomaster boxer carrying case - no disassembly required Easy assembly Can hold over 800 grams of weight Model…
- Downloads
- 162
- Likes
- 22
- Rating
- 0
P
PrintablesSempervis
Radiomaster TX16S wall-mount
For maximum strenght you should print it standing up with supports under the hooks
- Downloads
- 162
- Likes
- 12
- Rating
- 5
P
PrintablesJonathan_Ott
Radiomaster RX-RP1 Receiver V7.1 Case Mount 20mmx20mm
Remix of Radiomaster RX-RP1 Receiver V7 Case Mount 20mmx20mm
- Downloads
- 162
- Likes
- 12
- Rating
- 5
P
PrintablesRaptor_50_Titan
RadioMaster Logo Wall Art Fan Art
This is the Wall art version/Fan art of the RadioMaster logo. Can be attached using the standard 3M command strips. Please comment with any improvements
- Downloads
- 160
- Likes
- 11
- Rating
- 0
P
PrintablesReinis
Radiomaster Pocket Smallrig phone mount - without clamp
Printed at 45 degrees with tree supports in PETG. Like in the original model, transmitter needs a hole drilled in the enclosure and the inner part installed inside (using the 2xM3 bolts as in original seems excessive, as the inner part…
- Downloads
- 160
- Likes
- 27
- Rating
- 0
P
PrintablesDaniel Düsentrieb
Radiomaster Zorro battery extension holder
Radiomaster Zorro battery extension holder for a Radiomaster LI ON 5000mah Battery. Tight fit, No special settings needed. I printed mine in PLA. --------------------------------------------------------------------------- Halter für eine…
- Downloads
- 156
- Likes
- 8
- Rating
- 4
P
PrintablesGermy ballswell
QAV-S antenna mount for radiomaster RP3 (TBS Crossfire)
printed in TPU. I made this so my TBS crossfire antenna wires go underneath the two upright camera mount plates and your T antennas clip in. This is fit on my QAV-s Joshua bardwell edition, idk if the other versions of the frame will fit…
- Downloads
- 151
- Likes
- 7
- Rating
- 0
P
PrintablesNordfpv
Radiomaster TX16S gimbal protection
A very simple gimbal protector for the Radiomaster TX16S with holes big enough grand lotus stick ends Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 200 Infill: 25 Filament: EcoJake PLA Doesn't…
- Downloads
- 149
- Likes
- 14
- Rating
- 0
P
Printablesstrohbi
Ikea Skandis Radiomaster Zorro Pedgeboard Mount
Hello, This is a Ikea Skandis Pedgeboard Mount for the Radiomaster Zorro. It snaps in with a click and is simple to print without supports.
- Downloads
- 148
- Likes
- 20
- Rating
- 5
P
PrintablesWgLabs
Radiomaster GX12 Gimbal Protector
Designed by Wga I print it with PLA, TPU maybe
- Downloads
- 147
- Likes
- 13
- Rating
- 0
P
PrintablesNordfpv
Radiomaster Boxer Max (AG-01) spacer
There are hundreds of spacer like this on the Internet, and I printed many but none really fit my radio and did the work I wanted to do. The radio I have is a Radiomaster Boxer Max, which comes with AG01 gimbals. The main thing of these…
- Downloads
- 147
- Likes
- 19
- Rating
- 5
P
PrintablesNathan
RadioMaster RP3 Receiver Case
This is a simple TPU and hardshell case for the RadioMaster RP3 receiver to keep it safe inside your quad. The white inner part was printed using TPU, the outer shell was printed to using PETG.
- Downloads
- 146
- Likes
- 11
- Rating
- 0
P
Printablesmaltvat
RADIOMASTER TX16S BATTERY SPACER
This is a simple spacer to keep the 18650 battery holder from moving around and possibly damaging the power cables going into the radio If you ever plan on keeping your radio in your car I suggest you do not print this in PLA. I printed…
- Downloads
- 144
- Likes
- 27
- Rating
- 0
P
Printablesdg fpv
radiomaster tx12 gimbal protection
i disliked all the gimbal protections i found online so i designed this one…
- Downloads
- 144
- Likes
- 9
- Rating
- 0
P
PrintablesTechBytes.ca
Radiomaster TX16S Battery Bay Cover
A Remake of the original Radiomaster TX16s Battery Cover with TB Logo. Original Make credit to Radiomaster RC. Unable to make this as a remix due to link being unavailable currently. Hope you enjoy. https://techbytes.ca/3dprints/ IG:…
- Downloads
- 141
- Likes
- 11
- Rating
- 0
P
PrintablesMaizeShark
Radiomaster Pocket Phone Holder
This is a 3D-printable phone and screen mount for the Radiomaster Pocket controller. With a wide clamping range of 64mm to 84mm, this mount can hold almost all modern smartphones. The design is inspired by an expensive commercial mount…
- Downloads
- 140
- Likes
- 13
- Rating
- 5
P
PrintablesEXEN
Radiomaster Zorro Handle (stronger)
This design uses m3 x 4mm heated inserts and m3x8mm bolts for the handle and m2x10mm bolts to mount the base to the radio. I changed the overall shape and look of the handle and beefed up the base mounting tabs as the original seemed…
- Downloads
- 135
- Likes
- 18
- Rating
- 5
P
PrintablesMadMax7774
RadioMaster TX16S Battery adapter for 5000mah Li-ion
A spacer to keep the 5000 mah lithium-ion battery from banging around in the battery tray. This will keep everything locked in place.
- Downloads
- 134
- Likes
- 13
- Rating
- 5
P
PrintablesHugo Pigeassou
Radiomaster TX15 TX15 MAX protection inter
proction pour inter Radiomaster tx15 tx15 max
- Downloads
- 132
- Likes
- 7
- Rating
- 0
P
PrintablesMatiasV
Radiomaster Zorro gimbal protector for Meat Sticks
Quick remix of Switchs Protectors to be use with Meat Sticks Ends I used Tinkercad https://www.tinkercad.com/things/j14xQvA1ouP
- Downloads
- 132
- Likes
- 4
- Rating
- 4
P
PrintablesOnce in a Six Side
Radiomaster Pocket Smallrig Magic Arm Mount
A really strong way to mount basically anything to your Radiomaster pocket using a Smallrig magic arm. Disassemble your radio. Slide the Outer Bracket onto the module bay on the rear of the radios frame. Use an M5 bolt to secure the Inner…
- Downloads
- 131
- Likes
- 30
- Rating
- 0
P
PrintablesCombinacijus
Radiomaster Pocket Hawkeye 3.5inch Monitor Mount
With Parametric Fusion 360 files. So stem could be easily modified to be taller or shorter No supports. Only brim needed for tall part Easy to disassemble Held by friction Stem must be printed in shown upsidedown orientation for it to be…
- Downloads
- 130
- Likes
- 22
- Rating
- 0
P
PrintablesLegoRJ35
Radiomaster MT12 steering wheel with Thumb grip V2
No support needed. You only need support for V2 Recommend TPU95.
- Downloads
- 127
- Likes
- 16
- Rating
- 5
P
Printablesbullitt168
Radiomaster RP1 Receiver Mount for Volador VX3.5
A mount for the Radiomaster RP1 ELRS receiver for the Volador VX3.5 FPV drone. Fits on the underside or upperside of the frame. Hole diameter is 20mm. I used 6mm M2 screws for mounting, the 5mm M2 screws which came with the frame kit…
- Downloads
- 125
- Likes
- 18
- Rating
- 5
P
PrintablesVSR3D
Sanwa Wheel Adapter for RadioMaster MT12
Use your favorite steering wheel that is compatible with Sanwa radios on the Radiomaster MT12!
- Downloads
- 125
- Likes
- 13
- Rating
- 5
P
PrintablesLukáš Ráček
Radiomaster TX16S My Rear Grips
My remix of the original grips, which are more ergonomic for my hands.
- Downloads
- 123
- Likes
- 11
- Rating
- 5
P
PrintablesCapirex
Radiomaster RP3 V2.1 holder
I recommend not using the “waterproofing” tube sold with the RP3 if you use this case. To hold the antenna, add a 2.5mm zip tie like I did (see the picture) I crashed in trees, had to recover my drone using a wood log and nothing was…
- Downloads
- 122
- Likes
- 6
- Rating
- 0