Radiomaster Boxer Stick Cam Mount Collection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stick cam holder collection for the Radiomaster Boxer.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 186
- Makes
- 0
- Views
- 757
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I couldn't find any design that fitted my needs and sat as flush as possible with the controller so I designed my own from scratch.
Turns out declining it for Standard and foldable antennas was an easy job so I ended up with a whole collection !
Low profile, as compact as it gets, enjoy.
Option 1 : Standard
Fits the stock SMA antenna
Option 2 : Foldable Antenna mod
Fits foldable antenna mod (ex Radiomaster Pocket Antenna mod)
Thanks to mrv_fpv for his help on prototyping that one !
Option 3 : Internal Antenna mod
Fits my Internal Antenna mod available here.
Bonus : If you're flying with a 900mHz module like me It also fits my RadioMaster Bandit Micro Tango 2 foldable antenna mod and allows to fold the antenna all the way !
_______________________________________________________________________________________________________________________________
Printing material
Rigid. I'm using PLA, but PLA+, PETG etc would work fine, anything but TPU.
Hardware required
4x M3*14mm Cylinder head screws. (Part is held in place by the Strap Mounting holes on the back)
1x M5 Locknut (For the Universal Gopro attachment)
The Pole
Pole, Selfie stick, Extension, whatever it's called you need one of theses,
I'm using a 200mm one and this is how the picture looks like on a Gopro Sensor (4:3 full frame).
It's plenty wide and I'm guessing 135mm might not be a bad pick if you want something more compact.
With a GoPro Session on my setup the weight is not bothering at all.