1 / 3
MG4 EV 6.5" front door speaker adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter to fit aftermarket 6.5" speakers into your MG4 front doors.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 123
- Makes
- 0
- Views
- 459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
An adapter to fit an aftermarket 6.5" speaker into the front door of your MG4 EV. I used a Polk speaker but I believe the hole spacing is fairly universal. The holes are 155mm centre to centre across.
I have included cutouts for the speaker wires to enter from the top or bottom, and left or right side. You can reuse the original screws to hold the adapter to the door.
Print in a temperature resistant filament that is flexible (for the screw holes) - ASA, PETG, PC etc. and recommend 4 walls, 15% infill.
Enjoy.