Counting matching models…
In the MG4 there is the Problem, that, when you drive curves fast, the Mobile phone can fly away from the Mat. This railing keeps it safe. Print in PETG or ABS, because of the temperatures in the Car in Summer.
The German MG42, introduced in 1942, remains one of history’s most influential machine guns. Famous for its blistering rate of fire up to 1,200 rounds per minute, it was nicknamed "Hitler's Buzzsaw". Because the design was cheap to stamp…
speaker adapters used to install aftermarket 6.5" speakers, I installed Audison prima 6.5s in all 4 corners of my xpower as well as sound deadening, Audison tweeters, prima AP8.9 amp and subwoofer, I recommend using this type of foam…
{{hello world}} This is my MagSafe compatible charger mount for the MG4 dashboard which is designed to fit the original Apple MagSafe charger with the 95 cm cable. It’s important to print this mount with heat resistant filament - e. g.…
Bracket must be printed in PETG (or similar). Would recommend adding a bit of foam between it and the speaker back. Mount can be printed in PLA . A small, paint-on support for the cut-out bit is ideal.
Da die untere Halterung der Kofferraumabdeckung abgebrochen war habe ich eine neue erstellt.
mg4 Araçlar için orta konsolda kullanacağınız düzenleyici.
LHS/RHS mirrored tweeter brackets for the MG4 EV, and a Tweeter cup to hold a commonly available tweeter (Hertz Uno).
These fingers were made in our lab for manipulating 15mm and 25.4mm rectangular glass substrates.
Dobot MG400 Button Pusher to affix to the arm
Zyxel VMG4005 \ Cetin Terminator wall holder
Mount to fit readily available battery powered LED lights (e.g. https://www.amazon.co.uk/dp/B0CSFTQ5L7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ) to the back seat grab handles of the 2026 MG4. The lights can either friction fit, or you can…
Designed to print at 1:285 (STL should load into your slicer a little large, scale down to your preference. Scaled to 95% should be about right.) Always open to feedback.
MG4 EV Urban: MagSafe Adapter for Inductive Charging Dock (Active and Comfort model ranges) As the Active and Comfort model ranges of the MG4 EV Urban do have inductive charging docks (albeit non-functional), I have designed an adapter…
1. Description After seeing the different creations allowing chasing at 300kmh, I also wanted to create a more aerodynamic machine in order to reach 200km/h more modestly but in 4" light. The basic goal was to stay below 250g, but it is…
Simple cover for the light sensor to keep lights on
Dimensions are correct but model can be a bit too big depending on printer Recommend printing at 98%
Adaptation of MintyTrebor's excellent model for the MGS5 to fit the new 2026 MG4. I also needed rear cable exits so have added a model with these too. Printed in PETG, 0.4mm nozzle, 0.2mm layer height, tree supports. Happily the reduced…
TPU mat for the back seat cubby hole in the center console of the 2026 MG4 to reduce things sliding around. FreeCAD file included in case you need to tweak anything. Printed in TPU, 0.4mm nozzle, 0.2mm layer height, no supports.
Mount to fit readily available battery powered LED lights (e.g. https://www.amazon.co.uk/dp/B0CSFTQ5L7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ) to the back seat grab handles of the 2026 MG4. The lights can either friction fit, or you can…
Dimensions are correct but model can be a bit too big depending on printer Recommend printing at 98%
An adapter to fit an aftermarket 6.5" speaker into the front door of your MG4 EV. I used a Polk speaker but I believe the hole spacing is fairly universal. The holes are 155mm centre to centre across. I have included cutouts for the…
Adaptation of MintyTrebor's excellent model for the MGS5 to fit the new 2026 MG4. I also needed rear cable exits so have added a model with these too. Printed in PETG, 0.4mm nozzle, 0.2mm layer height, tree supports. Happily the reduced…
TPU mat for the back seat cubby hole in the center console of the 2026 MG4 to reduce things sliding around. FreeCAD file included in case you need to tweak anything. Printed in TPU, 0.4mm nozzle, 0.2mm layer height, no supports.
Thanks to Harrison Bergeron for pointing out these awesome .SKP files And thanks to the designer very cool at https://3dwarehouse.sketchup.com/model.html?id=e4aae0c0ae79acc7fec1d9df8807552d
Base plate with a single centre M3 mounting hole to allow you to make your designs in two pieces and use this as the base mounting plate.
