GVDA DualPower Pack V1 - Portable PowerBank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
What is this project? This is a compact portable powerbank designed to power a soldering iron or small devices
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🧠 What is this project?
This is a compact portable powerbank designed to power a soldering iron or small devices like a phone. It uses a 18650 Li-ion battery, a TP4056 charging module, and an MT3608 boost converter to provide adjustable output voltage.
Perfect for beginners and makers who want to build a simple and useful electronics project.
---
⚙ Assembly instructions:
1 Connect battery to TP4056
Battery + → B+
Battery – → B-
2 Connect TP4056 to MT3608
OUT+ → VIN+
OUT– → VIN–
3 Power and adjust voltage
- Connect USB-C cable to TP4056
- Measure output voltage on MT3608
- Adjust using potentiometer:
• 9V → soldering iron
• 5V → phone
⚠ Set voltage BEFORE connecting device!
4 Connect output USB-C
Red → OUT+
Black → OUT–
5 Final assembly
- Insert components into the case
- Install M2 threaded inserts (for plastics)
- Glue gasket/seal if needed
- Close enclosure
---
⚠ Safety notes:
- Double check polarity
- Do not short circuit the battery
- Use protected 18650 cell
- Do not exceed safe voltage