Multiboard Bathroom Storage Cup with Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Multiboard compatible storage cup with a lid!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
I needed a Multiboard compatible storage cup with a lid to store Q-tips, cotton balls, cotton pads, and whatnot so that I could make some desperately needed space in my bathroom drawers... The storage cups are all 75mm in diameter and are sized 50mm, 75mm, and 100mm in height.
I printed them at 0.2mm layer height with a 0.6mm nozzle... 2 Walls... 6 top/bottom layers... 12% cubic infill... (whatever your settings are for all of your other Multiboard parts will be just fine I am sure...)
The snaps are the only part of this design that require supports. I recommend painting those supports only on the bottom most surface of the snap.... But you do you boo ;)