“Carolina” Sand Mould (220×60×25 mm, Scalable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable sand mould “Carolina”. 220×60×25 mm, scalable, prints without supports.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This is a 3D printable sand mould featuring the name “Carolina”, perfect for creating clean, readable impressions in sand.
The mould measures 220 × 60 × 25 mm and is designed to be easily scaled in your slicer to suit different sizes or applications.
It prints cleanly without supports, making it quick and hassle-free to produce. The geometry is optimized for good imprint definition while remaining easy to remove from the sand.
Ideal for beach use, sandboxes, or creative outdoor play.
Key Features
Text: “Carolina”
Size: 220 × 60 × 25 mm
Fully scalable
No supports required
Clean and readable imprint
Fully 3D printable
Print Settings
Material: PLA or PETG
Layer height: 0.2–0.28 mm
Infill: 10–20%
Supports: Not required
Print orientation: Flat on the bed
Notes
Can be scaled uniformly in slicer
Larger sizes improve readability in loose sand
Works best with slightly compacted sand
Disclaimer
This model is intended for recreational use. Muffelkraft assumes no responsibility for misuse.