1 / 6
3DSETS MOGSTER pulley for 16T 32P (M0.8) pinion — zdjęcie 1
1 / 6

3DSETS MOGSTER pulley for 16T 32P (M0.8) pinion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A pulley for the #3DSETS MOGSTER to fit a 16T mod 32P pinion since I didn't have the required 17T pinion M0.6.

Ocena
5 / 5
Polubienia
4
Pobrania
18
Wydruki
1
Wyświetlenia
141
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Open Community License v1

Since I did not have the required 17T M0.6 pinion at hand and did not want to buy yet another part for the MOGSTER build, I designed a pulley to fit a 16T 32P (M0.8) pinion I did have already.
Designed based on the STL from the purchased files, completely modeled in Fusion360.

Since I like modifying downloaded files myself, I provided the *.step file too. You can modify it at will.

The pulley in the picture was printed in PCTG on a Prusa CoreOne +
The fit is perfect, slides in without play. You may have to offset the gear faces to get the same result from your printer (that's why I've added the *.step)

my first upload to Printables :) 

Tagi