Hoover Empower Upper Wand Hose Holder Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side wand/hose holder for the Hoover Empower vacuum
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This is a replacement for the Hoover Upper Wand Holder part 92001003.
Broke mine years ago. Learning Freecad so this is my 2nd model. Screw hole dimension is still slightly off but works.
Printed in cheap Kingroon PETG gray with tree supports. I split the model into 2 prints, you can see in one of the images the split line, to reduce the amount of supports. Superglue on the 2 halves with clamps.
Be very careful removing supports because it cracked some of the features that stick out of the model that need to be supported.
Found a screw (maybe the original?) from a bin and it works. I tightened up the diameter of the wand holder by 1mm after I printed.
Here's a link to the part # I found in black.
https://tinyurl.com/3y8uvsfr