1 / 4
Hoover Empower Upper Wand Hose Holder Clip — image 1
1 / 4

Hoover Empower Upper Wand Hose Holder Clip

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Side wand/hose holder for the Hoover Empower vacuum

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
30
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

This is a replacement for the Hoover Upper Wand Holder part 92001003.  
Broke mine years ago.  Learning Freecad so this is my 2nd model.  Screw hole dimension is still slightly off but works.

Printed in cheap Kingroon PETG gray with tree supports.  I split the model into 2 prints, you can see in one of the images the split line, to reduce the amount of supports.  Superglue on the 2 halves with clamps.


Be very careful removing supports because it cracked some of the features that stick out of the model that need to be supported.

Found a screw (maybe the original?) from a bin and it works.  I tightened up the diameter of the wand holder by 1mm after I printed.


Here's a link to the part # I found in black.
https://tinyurl.com/3y8uvsfr

Tags