GEPRC T-Cube 18 analog VTX antenna mount for circularly polarized antennas
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Antenna mount for circularly polarized antennas with 14 mm in diameter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
VTX antenna mount for the GEPRC T-Cube 18 Analog, designed to fit circularly polarized antennas with a 14 mm diameter.
The example shown in the images uses a FlyFishRC Osprey 40 mm antenna with a U.FL / IPEX connector.
This is an early, unpolished version, but both the beeper and the antenna fit very snugly. The bottom section for the receiver antenna has been made slightly stiffer to improve fit and stability. FreeCAD can be a bit finicky when adding fillets at the intersection of the two cylinders, but the print appears durable enough for now.
Printed in TPU at a 0.15 mm layer height, it produces good results using supports on the build plate only.
Attention: This mount fits the Analog version only. The O4 version has a taller stack and longer standoffs, but you could easily extend the standoff sleeve to make it fit. Alternatively, measure the standoff length and send me a message—I can create a longer version for you.