1 / 3
GEPRC T-Cube 18 analog VTX antenna mount for circularly polarized antennas — image 1
1 / 3

GEPRC T-Cube 18 analog VTX antenna mount for circularly polarized antennas

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Antenna mount for circularly polarized antennas with 14 mm in diameter.

Rating
0 / 5
Likes
0
Downloads
18
Makes
0
Views
92
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

VTX antenna mount for the GEPRC T-Cube 18 Analog, designed to fit circularly polarized antennas with a 14 mm diameter.

The example shown in the images uses a FlyFishRC Osprey 40 mm antenna with a U.FL / IPEX connector.

This is an early, unpolished version, but both the beeper and the antenna fit very snugly. The bottom section for the receiver antenna has been made slightly stiffer to improve fit and stability. FreeCAD can be a bit finicky when adding fillets at the intersection of the two cylinders, but the print appears durable enough for now.

Printed in TPU at a 0.15 mm layer height, it produces good results using supports on the build plate only.

Attention: This mount fits the Analog version only. The O4 version has a taller stack and longer standoffs, but you could easily extend the standoff sleeve to make it fit. Alternatively, measure the standoff length and send me a message—I can create a longer version for you.

Tags