TheOptiForge Stealth Ripple Gyro | Ultimate PIP Fidget (Flat-Bed Edition)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Experience the ultimate tactile flow. The TheOptiForge Stealth Ripple Gyro is highly engineered, fully Print-in-Place .
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The Print-in-Place Gyro, mathematically perfected. Most concentric 3D-printed gyros suffer from a fatal flaw: to make them spin without crashing, designers use extreme chamfers that leave the model with a razor-thin contact line on the print bed. The result? Failed prints and terrible bed adhesion.
At TheOptiForge, we engineered a solution: The Asymmetric Stealth Profile. By calculating the exact "swing radius" of each concentric ring, we redistributed the chamfer geometry. The outer edge of each ring has a large clearance chamfer to allow 360-degree rotation, while the inner edge is minimized.
The Result: Every single one of the 5 rings features a massive, perfectly flat 2.0 mm wide base that sits flush on your print bed. Supreme bed adhesion, zero print failures, and incredibly smooth gyroscopic flow.
Wrapped in our aggressive, light-catching "Stealth" geometry with a signature hex-core, this is the ultimate test of your printer's tolerances and an incredibly satisfying daily carry fidget.
See it in action here:
⚙ Premium Design Features:
Flat-Bed Adhesion: A true 2mm flat base under every ring ensures it sticks to the bed without needing brims or rafts.
Calculated Swing Radius: Rings clear each other perfectly without colliding or binding.
Zero-Assembly PIP Mechanism: Engineered with precise conical hinges that support themselves during printing.
Faceted Stealth Edges: The aggressive chamfers provide superior grip and a striking, modern visual profile.
🖨 CRITICAL Print Settings (0.4mm Tolerance):
This is a high-precision mechanical part. Follow these rules for a perfect print:
Supports: ABSOLUTELY NONE. * Brim: NOT REQUIRED. (Thanks to the Flat-Bed optimization). Use a skirt to prime the nozzle.
Layer Height: 0.16mm or 0.20mm. (Do not print thicker, or the internal conical hinges will bind).
Cooling/Fan Speed: 100%. Fast cooling prevents the tight 0.4mm gaps from sagging and welding together.
Post-Processing: Once off the build plate, give each ring a gentle but firm "twist" to snap the initial tolerance bonds.
Designed by TheOptiForge. Modern Making. Optimized. If you appreciate engineering that respects your 3D printer, drop a Like, upload a Make with your filament of choice, and follow us for more premium mechanical designs.