TheOptiForge Stealth Ripple Gyro | Ultimate PIP Fidget (Flat-Bed Edition)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Experience the ultimate tactile flow. The TheOptiForge Stealth Ripple Gyro is highly engineered, fully Print-in-Place .
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
The Print-in-Place Gyro, mathematically perfected. Most concentric 3D-printed gyros suffer from a fatal flaw: to make them spin without crashing, designers use extreme chamfers that leave the model with a razor-thin contact line on the print bed. The result? Failed prints and terrible bed adhesion.
At TheOptiForge, we engineered a solution: The Asymmetric Stealth Profile. By calculating the exact "swing radius" of each concentric ring, we redistributed the chamfer geometry. The outer edge of each ring has a large clearance chamfer to allow 360-degree rotation, while the inner edge is minimized.
The Result: Every single one of the 5 rings features a massive, perfectly flat 2.0 mm wide base that sits flush on your print bed. Supreme bed adhesion, zero print failures, and incredibly smooth gyroscopic flow.
Wrapped in our aggressive, light-catching "Stealth" geometry with a signature hex-core, this is the ultimate test of your printer's tolerances and an incredibly satisfying daily carry fidget.
See it in action here:
⚙ Premium Design Features:
Flat-Bed Adhesion: A true 2mm flat base under every ring ensures it sticks to the bed without needing brims or rafts.
Calculated Swing Radius: Rings clear each other perfectly without colliding or binding.
Zero-Assembly PIP Mechanism: Engineered with precise conical hinges that support themselves during printing.
Faceted Stealth Edges: The aggressive chamfers provide superior grip and a striking, modern visual profile.
🖨 CRITICAL Print Settings (0.4mm Tolerance):
This is a high-precision mechanical part. Follow these rules for a perfect print:
Supports: ABSOLUTELY NONE. * Brim: NOT REQUIRED. (Thanks to the Flat-Bed optimization). Use a skirt to prime the nozzle.
Layer Height: 0.16mm or 0.20mm. (Do not print thicker, or the internal conical hinges will bind).
Cooling/Fan Speed: 100%. Fast cooling prevents the tight 0.4mm gaps from sagging and welding together.
Post-Processing: Once off the build plate, give each ring a gentle but firm "twist" to snap the initial tolerance bonds.
Designed by TheOptiForge. Modern Making. Optimized. If you appreciate engineering that respects your 3D printer, drop a Like, upload a Make with your filament of choice, and follow us for more premium mechanical designs.