GraviTrax Junior Drop Tower / Fallturm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable drop tower for GraviTrax Junior. Let marbles fall through multiple levels and rejoin the track below.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This set allows a marble to drop from a higher level and return to the track below.
At the top, the marble enters a track stone with a central opening.
From there it falls vertically through a stack of special height spacers with an internal drop tube.
These spacers are fully stackable, so you can combine them to create different drop heights. The marble can fall any number of levels before reaching the bottom element.
At the bottom, the stacked spacers connect to a track stone that smoothly guides the marble back onto the track.
This allows you to create vertical drops and compact multi-level marble runs.
Features
modular vertical drop system
stackable height spacers with drop tube (10 / 20 / 30 mm)
compatible with GraviTrax Junior
flexible drop height depending on the number of stacked spacers
Looking for more parts?
This model belongs to my GraviTrax Junior Compatible Collection.
This is a fan-made accessory and not an official Ravensburger product.
Printing information
The STL files are correctly aligned.
0.2 mm layer height
2 Perimeters recommended
Infill:
Height spacers: 0 %
Track stones: 10% Gyroid
Some support is required. See the red highlighted areas in the images below.
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my other models here.