1/6 Commander's support plate - M26 Pershing Tank Armortek
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This plate allows the animated 1/6 figurine to be installed in the tank commander's hatch.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This design is a specific need I had to equip the 1/6th scale M26 Pershing tank produced by the company Armortek in the UK.
This plate allows the tank commander's bust to be fixed in place. It is fixed from the interior of the turret with the original screw in 3 places (3 times 2 screws 3x40). It is sufficient and very stable.
The central round allows to fix the figurine on the plate with 4 3x8 screws.
The pass through holes for servo and cables
My commander is also 3D printed and powered by 6 micros servos (animatronics) with US Army uniform. The program that allows the commander to move is stored in a mini Arduino inside the turret.
Printing is straightforward with a 0.4 mm nozzle and 30% infill (PLA)