[MMCX] Improved Koss KSC75 MMCX mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another KSC75 MMCX mod. This one is low profile, does not limit tilt and fits the driver housing perfectly.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 156
- Wydruki
- 3
- Wyświetlenia
- 1002
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Other designs didn't really fit the bill. One limited the tilt of the driver, the other seems very bulky. I designed this myself in Fusion and it seems to work perfectly. I regained the tilt and it covers the solder area of the driver nicely.
Make
I printed on Prusa Mini with 0.25mm nozzle and 0.07mm layer height, 100% infill with Devil Design PLA.
Please excuse the dirty screws I used, they came from a water damaged Tamagotchi.
Parts and supplies needed
2x M2(.3 might work better) self tapping 4-6mm screw with flat bottom. Like the ones found in plastic housings.
https://nl.aliexpress.com/item/1005005264316197.html2x printed parts. choose the design you like 😀 L/R/heart/no marking or something you want yourself. files are there!!
Glue (I use two component glue)
2x MMCX sockets (for 3mm hole)
https://nl.aliexpress.com/item/1005004039277855.html
How to
print parts
glue mmcx to the part (you may have to make the hole larger, for my printer I did not)
wait for glue to harden
solder to driver
close with screws
enjooy