[MMCX] Improved Koss KSC75 MMCX mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another KSC75 MMCX mod. This one is low profile, does not limit tilt and fits the driver housing perfectly.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 156
- Makes
- 3
- Views
- 1,002
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Other designs didn't really fit the bill. One limited the tilt of the driver, the other seems very bulky. I designed this myself in Fusion and it seems to work perfectly. I regained the tilt and it covers the solder area of the driver nicely.
Make
I printed on Prusa Mini with 0.25mm nozzle and 0.07mm layer height, 100% infill with Devil Design PLA.
Please excuse the dirty screws I used, they came from a water damaged Tamagotchi.
Parts and supplies needed
2x M2(.3 might work better) self tapping 4-6mm screw with flat bottom. Like the ones found in plastic housings.
https://nl.aliexpress.com/item/1005005264316197.html2x printed parts. choose the design you like 😀 L/R/heart/no marking or something you want yourself. files are there!!
Glue (I use two component glue)
2x MMCX sockets (for 3mm hole)
https://nl.aliexpress.com/item/1005004039277855.html
How to
print parts
glue mmcx to the part (you may have to make the hole larger, for my printer I did not)
wait for glue to harden
solder to driver
close with screws
enjooy