1 / 3
Rollei 35 LED Rewind Lever / Crank Handle Knob
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple knob for the rewind lever of the Rollei 35 LED
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Just snaps onto the plastic peg of the rewind lever, as shown in the pictures. Might work for other cameras with a similar peg for the knob, about 3mm diameter and 3mm height.
Print with an 0.4mm nozzle or smaller. Layer height 0.2mm. Scale down by 10% if it doesn't fit.