Kobo Stylus Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple case to hold the stylus, it's AAAA battery, and two spare nibs.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 442
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Design Requirements
I wanted a case to protect the stylus when moving around, with the option to keep the AAAA battery outside of the stylus in case it leaks when not in use for a long period of time. I am able to easily remove the nib without the included tool so a spot for the tool wasn't required.
FreeCAD Parameters
The following parameters are adjustable in the included FreeCAD file.
Stylus Height =143mm
Stylus Diameter =9.5mm
Button Width =4.8mm
Button Height =0.7mm
Button Offset =33mm
Taper Length =9mm
Tip Diameter =1mm
AAAA Length =42.5mm
AAAA Diameter =8.30mm
Nib Diameter =1.8mm
Nib Length =16.4mm
Nib Tool Diameter =13mm
Nib Tool Height =0.8mm
Tolerance =0.15mm
Wall Width =1.5mm
Cap Overlap =15mm
Chamfer = Stylus_Diameter / 2 - Wall_Width
Print Instructions
I printed in PETG with .4 mm nozzle with variable layer height. I only used infill on the battery slot, but I could have probably gotten away with bridging. The fit was really tight and required some post processing, but it works for me as is so I won't be revisiting it.
First Impressions
After the cleaning up the print a bit everything seems to fit securely, and nothing moves around when shaken. It does the job it was designed to do.