Shaft/Axle with R-Clamp Retention Holes – Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Axle/Shaft + R-clamps
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 387
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
The original shaft had a tendency to slide off the side supports during use, so I extended it by 2–3 mm and added holes sized for an R-clamp to keep it securely in place.
Printed successfully in both PLA and PETG without issues. For s\maller spools, sliding in an extra C-clamp (from the original files) improves stability, though for most standard spools it was not needed.
The R-clamp model is not mine; I lost track of the original source and can't locate it to credit the designer. If you recognize it, please let me know so I can add proper attribution.
This is my first remix contribution — hope it's useful to someone!
Print Settings
Setting | Value |
|---|---|
Layer height | 0.2 mm |
Perimeters | 2 |
Infill | 15%, Grid |
Supports | None |
Print speed | 150 mm/s |