1 / 4
Shaft/Axle with R-Clamp Retention Holes – Remix — image 1
1 / 4

Shaft/Axle with R-Clamp Retention Holes – Remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified Axle/Shaft + R-clamps

Rating
5 / 5
Likes
22
Downloads
160
Makes
1
Views
387
Reviews
1

Updated at source:

Model information

Category
Accessories
License
GNU General Public License v2.0

The original shaft had a tendency to slide off the side supports during use, so I extended it by 2–3 mm and added holes sized for an R-clamp to keep it securely in place.

Printed successfully in both PLA and PETG without issues. For s\maller spools, sliding in an extra C-clamp  (from the original files) improves stability, though for most standard spools it was not needed.

The R-clamp model is not mine; I lost track of the original source and can't locate it to credit the designer. If you recognize it, please let me know so I can add proper attribution.

This is my first remix contribution — hope it's useful to someone!

Print Settings

Setting

Value

Layer height

0.2 mm

Perimeters

2

Infill

15%, Grid

Supports

None

Print speed

150 mm/s