Under desk hanging headset holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Under desk headphone hanger with adjustment screw to suit desktop thickness of 30mm or less.
After trying a few other designs I wanted something with a smoother surface while still being strong enough not to deform under the weight of headphones or the pressure of being tightened to the table. Also designed to easily print without supports, just orient the holder on its back, and the screw on it's wide end!
.STLs for both left and right hand mounting, and with or without headphone cable clip (for 4mm thick cables). The adjustment screw has generous tolerances (0.4mm clearance) so with decent print setting it should screw in easily.