(Micro) SD Card Holder OUTDATED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An SD Card holder that holds 3 regular and 5 micro SD cards. Designed to fit in your pocket.
- Ocena
- 4,538 / 5
- Polubienia
- 108
- Pobrania
- 779
- Wydruki
- 15
- Wyświetlenia
- 4041
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Caution:
This is an old design that doesn't work on some printers because it relies on really tight tolerances. The new design can be found over here: https://www.printables.com/model/256778-micro-sd-card-holder-2
Only print this if you know what you're doing and you specifically want this design over the newer one for some reason.
This case comes with a lid that protects the SD cards from getting damaged or falling out.
I tested the prints on my stock Prusa Mini. I printed the case in Prusament PLA and the cover in Prusament PETG. I recommend 0.15mm for the case and 0.2 for the cover.
Video showcase
Changelog
- There's now a notch so the cover clicks into place instead of relying on a friction fit. I also made the Micro SD slots a little tighter based on user feedback.
- Made the notch a bit bigger so it lasts longer after extended use.
- 23/04/2022: I added a version of the holder without the loop as requested by user Balu