Dust collector record power BS300E BS350S

Dust collector for the record power band saw bs300e and bs350s. The dust collector sucks the chips where they originate, directly under the table. The efficiency is enormous. Without a dust collector, huge amounts of chips accumulate on the lower belt guide and also next to the machine, as well as in the machine. The dust collector reduces this chips to a fraction.

For installation, it is necessary to remove the original band guard (remove the saw blade). Then the rear guide (with the ball bearing) must be completely unscrewed, which can be reinstalled after installing the dust collector. Now the dust collector can be used. For easier attachment via the screws, two holes are provided in the dust funnel, through which an Allen with ball head can be inserted. Now the previously removed belt guide can be reinserted.

Please check first: hole diameter of the table from the bottom about 62mm

Important: When the dust collector is mounted, tilting the table is no longer possible.

Print settings:

PLA+, PLA-CF

Support (tree)  necessary - see picture

0.4 nozzle

0.2 layer height

4 wall lines

20% infill

5 bottom and top layers

Disclaimer

1. Digital Quality & Compatibility

This model is provided "as is." I make no guarantee that the model will function flawlessly with any specific slicing software or 3D printer model. The buyer is responsible for verifying the technical requirements for printing.

2. Print Success
The quality of the physical object depends significantly on factors beyond my control (e.g., printer settings, material selection, ambient temperature, calibration). Liability for failed prints or material waste is excluded.

3. Use & Safety

* Not a Toy: Unless explicitly stated otherwise, the models are not certified as children's toys.

* Limitation of Liability: I am not liable for damages resulting from improper use, post-processing (e.g., sanding, painting), or use of the printed object.

* Food Contact: The models are not food-safe by default unless special materials are used and the model has been designed accordingly.

4. Statutory Warranty
The statutory rights of consumers with regard to digital products remain unaffected, unless they can be effectively excluded. In the event of demonstrable technical errors in the file (e.g., a defective mesh), please contact me for a replacement.