Stonks AKA "Meme Man" Mask w/ Straps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Memes man to include eye holes and strap loops.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution
A friend wanted a print of this mask with the eyes punched out to see through. I also added loops for attaching face straps to it. I printed in the upright position using the 0.16mm quality preset in Bambu studio w/ tree supports
2Pcs Adjustable Extension Mask Straps
https://www.amazon.com/dp/B0FNQPSL9D
COPIED DESCRIPTION FROM ORIGINAL:
Had a request to make a Halloween costume for a friend. Used the "Enslaved Plastic" model as a base, then used Meshmixer to hollow+thicken and repair any mesh-errors.
Tried printing at 249mm high. First print was at ~45 deg. angle and fell over after 5 hours. Second print was straight vertical with 5% infill support and .2mm X/Y/Z distance.
Support Settings:
Supports: Tree Infill: 5% Pattern: Grid X/Y Dist.: 0.2mm Z Dist: 0.2mm Tree Support Branch Distance: 0.8mm Tree Support Branch Diameter Angle: 7 deg Support Overhang Angle: 40 Tree Support Branch Diameter: 3mm Speed: 50mm/s
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15%
Filament: Forgot PLA+ Bone WhitePost-Printing =============
Supports began to fuse with the base, which is understandable given my tight tolerances. I used a dremel and some sandpaper to remove the excess filament.
Category: Costume