Stonks AKA "Meme Man" Mask w/ Straps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the Memes man to include eye holes and strap loops.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 13
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Masks
- License
- Creative Commons — Attribution
A friend wanted a print of this mask with the eyes punched out to see through. I also added loops for attaching face straps to it. I printed in the upright position using the 0.16mm quality preset in Bambu studio w/ tree supports
2Pcs Adjustable Extension Mask Straps
https://www.amazon.com/dp/B0FNQPSL9D
COPIED DESCRIPTION FROM ORIGINAL:
Had a request to make a Halloween costume for a friend. Used the "Enslaved Plastic" model as a base, then used Meshmixer to hollow+thicken and repair any mesh-errors.
Tried printing at 249mm high. First print was at ~45 deg. angle and fell over after 5 hours. Second print was straight vertical with 5% infill support and .2mm X/Y/Z distance.
Support Settings:
Supports: Tree Infill: 5% Pattern: Grid X/Y Dist.: 0.2mm Z Dist: 0.2mm Tree Support Branch Distance: 0.8mm Tree Support Branch Diameter Angle: 7 deg Support Overhang Angle: 40 Tree Support Branch Diameter: 3mm Speed: 50mm/s
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15%
Filament: Forgot PLA+ Bone WhitePost-Printing =============
Supports began to fuse with the base, which is understandable given my tight tolerances. I used a dremel and some sandpaper to remove the excess filament.
Category: Costume