Pegfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basically Gridfinity, but designed to socket into pegboard, so you don't have to print the grid.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity is great, but I'm using a Prusa Mini+, so my bed volume is quite small and printing grids gets very tedious. As such, I modeled a series of Gridfinity-ish containers, designed to socket into standard 1/8" (4.6mm) thick pegboard, with 1/4" (6.35mm) diameter holes, spaced 1" (25.4mm) center-to-center.
Printing's great, but it's not the best solution to every problem. Pegboard's already a perfect grid - use it.
The wall thickness on containers is 1.35mm - perfect for 3 walls, 0.45mm extrusion width, on a 0.4mm nozzle.
I've just been gluing the base to the container with CA.