Pegfinity
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basically Gridfinity, but designed to socket into pegboard, so you don't have to print the grid.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity is great, but I'm using a Prusa Mini+, so my bed volume is quite small and printing grids gets very tedious. As such, I modeled a series of Gridfinity-ish containers, designed to socket into standard 1/8" (4.6mm) thick pegboard, with 1/4" (6.35mm) diameter holes, spaced 1" (25.4mm) center-to-center.
Printing's great, but it's not the best solution to every problem. Pegboard's already a perfect grid - use it.
The wall thickness on containers is 1.35mm - perfect for 3 walls, 0.45mm extrusion width, on a 0.4mm nozzle.
I've just been gluing the base to the container with CA.