1 / 8
X-limit Switch Housing for Voxelab Aquila - Print Larger Models — zdjęcie 1
1 / 8

X-limit Switch Housing for Voxelab Aquila - Print Larger Models

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The nozzle can now reach the edge of the bed. Increases the available volume to 230x230 vs 220x220.

Ocena
0 / 5
Polubienia
10
Pobrania
67
Wydruki
1
Wyświetlenia
521
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

One strange difference between the Ender and the Aquila is the X-limit switch location. The housing for the Aquila positions the limit switch further into the board. As a result, the nozzle couldn't physically touch the last 7mm of the bed. So I remade the switch housing.

Two versions were uploaded. One with a zip tie location and one without the extra zip tie location for those that are running stock wiring.the 

Printed in ABS. PETG would probably be fine as well.

Supports required. See picture.