1 / 8
X-limit Switch Housing for Voxelab Aquila - Print Larger Models
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The nozzle can now reach the edge of the bed. Increases the available volume to 230x230 vs 220x220.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 67
- Makes
- 1
- Views
- 521
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
One strange difference between the Ender and the Aquila is the X-limit switch location. The housing for the Aquila positions the limit switch further into the board. As a result, the nozzle couldn't physically touch the last 7mm of the bed. So I remade the switch housing.
Two versions were uploaded. One with a zip tie location and one without the extra zip tie location for those that are running stock wiring.the
Printed in ABS. PETG would probably be fine as well.
Supports required. See picture.