Dry Box Filament Guard & Anti-Tangle Spool Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anti-Tangle Spool Guard: Prevents filament jumping off the rim and jamming. Perfect for full spools in dry boxes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Essential for this dry box! If you use this setup, you need this to prevent filament tangles and jams.
--------------------------------------------------------------------------------------------------------------------------
Tired of filament jumping off the spool and ruining your prints?
We’ve all been there: you start a print with a brand-new, full spool of filament. Because it's wound right to the edge, the tension often causes loops to jump over the rim of the spool. Once it’s off the rim, it gets tangled around the axle or the spool holder, leading to a jammed extruder and a failed print.
This Filament Guard is designed to solve that exact problem. It mounts directly to the underside of your dry box lid, sitting just above the spool to act as a physical barrier. It keeps the filament layers contained within the spool rims, even when the spool is completely full.
Key Features:
Prevents "Spool Overspill": Keeps filament from jumping off the rim and tangling around the hub/axle.
Lid-Mounted Design: Attaches easily to the top of your container, keeping the bottom area clear for silica gel or rollers.
Hexagonal/Honeycomb Pattern: Optimized for strength while using less material and looking great in your setup.
Universal Compatibility: Works with most standard 1kg spools.
What you need:
[Number] x M3 or M4 screws (depending on your print settings/holes).
A dry box or airtight container with a flat lid area.