Replacement Foot for Logitech K220
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Feet for Logitech K220 (STEP file included)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Hey everyone! I designed these replacement feet for my Logitech K220 after the original ones gave up on me. I took all the measurements from the stock parts, though it honestly took about 6 tries to get the fit just right, haha.
I’m including the STEP file as well, so feel free to remix it, check the dimensions, or export a high-res STL if you're planning to go the SLA route.
Print Settings & Tips:
Supports: Required. I used tree supports with a 0.1mm Z-gap.
Layer Height: 0.1mm (except for the first layer) using a 0.4mm nozzle. I went thin because the total thickness is only 3.1mm.
Material: Black PETG.
Infill: 100% with 3 perimeters (0.42mm width) for maximum durability.
Hope this helps someone bring their keyboard back to life!