Sprite Extruder Pro Bracket for Mercury One.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix from thingiverse.com by ethomasgt. 5 enhancements to improve performance.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A remix of https://www.thingiverse.com/thing:6476036 by ethomasgt.
Enhancements:
Added support to eliminate flexing
Lifted the tool head to reduce lever effects
Shifted the CG towards the rail to reduce the overhang sags.
Added a mounting point for the BTT PAD7 ADXL345 module with a 44mm-wide mounting surface on top of the linear rail.
Incorporated design stress relief features to reduce/prevents warping and elephant foot.
The enhancements effectively reduce the Z offset caused by sagging under heavy toolhead loads and reduce vibration during rapid accelerations. This bracket should keep your Z offset stable between -2.0 and -2.7 mm, depending on the material used and print strength settings.
Printing requirements (Important due to the super-heavy toolhead)
Material: PETG-CF, PPA-CF, PA-CF
Layer Height: 0.2mm (0.25mm first layer)
Line Width:
Default 0.4
First Layer 0.4
Inner Wall 0.45
Sparse infill 0.6
Internal solid infill 0.5
Support:
Grid
Surface plate only
Iron Support Interface
Top Z distance 0.2mm
Top interface layer 3 or 4
Top interface spacing 0 mm
Walls printing order Inner/Outer (to increase strength)
Elephant foot compensation NOT required (incorporated in design)
If you like this, consider buying me a cup of coffee. Thank you!