Adapter for Gardena Combi System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to combine the Gardena combisystem with several attachements like brooms, hooks, etc. FreeCAD model included.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
After printing the mooring hook https://www.printables.com/model/1636340-mooring-hook-rope-over-tree-branch-tool I thought of a system to attach it to the Gardena combisystem. Mainly this is a 12 mm hexagon with a cylinder that slides into the telescopic handle.
If anyone needs to adjust the model to his own requirements, there's a FreeCAD file attached.
The design can be printed without any supports because its flattened on one side. I printed mine in PLA 0.2 mm normal mode with 20 % gyroid infill.