1U 2x 3.5" hdd tray for 10" rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10" rack tray (1U) for double 3.5" SATA hdd mounted in hot swap caddy's (dell model)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
1U tray for 2x SATA 3.5" hdd mounted using caddy's (dell style) for a 10" rack.
I've designed the bay's for this model of caddy
( https://www.amazon.se/dp/B07929WYSR?ref=ppx_yo2ov_dt_b_fed_asin_title ).
Included are 2 versions of the tray (flat & groove), the difference between them are the surface above the caddy. Flat will keep the leaf spring on top of the caddy under pressure witch might affect the shape of the top of the bay, while groove will let the leaf spring rise into the groove and 'relax'. The groove version will in my case for some reason affect the lock spring mechanics to not always open automaticly when the button is pressed... might be the height of the locking holes that are on the narrow side and make the lever-arm 'stick'.
You will probably have to make some sort of rest for the back-end of the tray, as the weight of 2 hdd might make the tray droop... On my version of rack, the length of the tray will reach the lower crossbar for support if the tray's are mounted in the lower position.
Each bay needs a SATA male to female hot swap connector attached with 2x M3x12mm machine screw and nut.
Print time on a Creality K2 plus is about 12h for one tray, using PETG on a 0.4 nozzle at 0.2 layer height with 2 walls and 10% cubic infill. You will need support on the raised mounting holes on the back of the tray.