My Quest 3 ETVR and Babble Setup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collection of ETVR and Babble prints for use my Quest 3, Zenni lenses, bobo m3 headstrap, and tundra tracker.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
I struggled to find all the parts I needed for my ETVR and Babble setup while digging through all the sites and discords, so I figured I would put it all together here for people if they wanted it. I originally was using a 130FOV camera, but had to replace them due to the original esp32s3 sense case destroying my ribbon cable. I modified the case so it wouldn't hurt the ribbon cable as easily.
Here are all of the original files used:
BoboVR m3 - Tundra Tracker Adapter: Unmodified
Quest 3 Zenni Prescription EyetrackVR Mount: Unmodified
Xiao Seeed Sense ESP32s3 and Cam Case for Project Babble: Unmodified
Quest 3 Facial Tracker Mount (Micro): Unmodified
(Modified so there isn't screws and more room for double sided tape)
https://www.thingiverse.com/thing:6926932/files
https://www.thingiverse.com/thing:6690739/files
https://www.thingiverse.com/thing:7013440
Tips and notes for other builders:
After buying some 160fov cameras to replace my 130fov, I have to say those fit the ETVR mount way better than the 130fov cameras did, though the IR lens was way harder to remove.
I used UV resin to hold the bolts on with a little extra grip, as well as UV resin to hold the lid for the V4 mini sled on.