My Quest 3 ETVR and Babble Setup
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Collection of ETVR and Babble prints for use my Quest 3, Zenni lenses, bobo m3 headstrap, and tundra tracker.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial
I struggled to find all the parts I needed for my ETVR and Babble setup while digging through all the sites and discords, so I figured I would put it all together here for people if they wanted it. I originally was using a 130FOV camera, but had to replace them due to the original esp32s3 sense case destroying my ribbon cable. I modified the case so it wouldn't hurt the ribbon cable as easily.
Here are all of the original files used:
BoboVR m3 - Tundra Tracker Adapter: Unmodified
Quest 3 Zenni Prescription EyetrackVR Mount: Unmodified
Xiao Seeed Sense ESP32s3 and Cam Case for Project Babble: Unmodified
Quest 3 Facial Tracker Mount (Micro): Unmodified
(Modified so there isn't screws and more room for double sided tape)
https://www.thingiverse.com/thing:6926932/files
https://www.thingiverse.com/thing:6690739/files
https://www.thingiverse.com/thing:7013440
Tips and notes for other builders:
After buying some 160fov cameras to replace my 130fov, I have to say those fit the ETVR mount way better than the 130fov cameras did, though the IR lens was way harder to remove.
I used UV resin to hold the bolts on with a little extra grip, as well as UV resin to hold the lid for the V4 mini sled on.