Football Earrings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support your favorite team with a pair of lightweight and customizable football earrings.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution
Support your favorite team with a pair of lightweight and customizable football earrings.
This model is optimized for multi-color 3D printing (you will need an AMS) and allows you to easily create color variants for any national team or club.
Bill of Materials
You will need:
A very small amount of glue can be useful to ensure the eye pins stay firmly in place.
Instructions
Each earring has a small hole at the top. Simply insert an eye pin through the hole, then attach the hook to the eye pin.
If needed, you can apply a tiny drop of glue to the eye pin before inserting it to secure it more effectively.
Overhangs & Printability
This model is made for FDM 3D printing, avoiding any excessive overhangs.
The side walls are rounded, with a custom profile starting at 45° to prevent firsts layers deformation.
Pins holes are diamond-shaped (easier to print and improve eye pins fit with glue).
Printing recommandations
Use a 0.2 mm or 0.4 mm nozzle with the Arachne wall generator enabled in your slicer for the best results.
Print on a smooth build plate (smooth PEI or similar).
If you experience adhesion issues, make sure your build plate is thoroughly cleaned.
Coloring recommandations
The model is divided into multiple components/objects, allowing you to easily assign different colors to each part of the earrings:
Top and bottom lines
Top and bottom pentagons
Top and bottom hexagons
Middle part with the pin hole
It is recommanded to set different colors by changing the filament for the whole components/objects in your slicer.
It helps to achieve a better color separation and a more sharp result.
Using the Color Painting tool may cause color bleeding between layers.
You might want this effect on purpose (creating a gradient effect/optical illusion), in this case you may want to use smaller layer heights (0.1 mm or less) and carefully selected filaments (with high transmission distance).
Left: Per object filament
Right: Using the coloring tool