7U 10" Rack Mount Legs for IKEA KALLAX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
7U 10" Server Rack that fits perfectly into an IKEA KALLAX unit
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed myself a mini 10" rack to fit inside an IKEA KALLAX compartment.
I paused the print before the top layers and filled the infill with steel beads, in heindsight I dont feel like this was necesarry but it helps with stability
The metal rack strips can be bought for cheap, these are held in place via heat set inserts
There are holes on the bottom to put rubber bumpers into which you can see in the 2nd photo just about
The rack its quite stable and I've had no issues with warping due to heat although its worth noting I installed a filtered 140mm fan to keep airflow up. This is controlled by the dial on the front
The legs require a 300mm bed size to print