Himoto EMXT-1 (or HSP or old Reely) front hub carrier / C-hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
C-hub for old Reely 4WD Monstertruck, corresponding to the Himoto EMXT-1 or another model by HSP
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Public Domain
This C-hub is designed to be compact and rigid. Its geometry differs slightly to the original part. As a result of the difference, steering and camber turnbuckles have to be tuned after changing from the original to this 3D-part. Monstertruck Wheels still fit with it, short course or buggy wheels will probably fit as well, but onroad wheels probably won't.
I recommend to print 5 perimeters (with 0,4 mm nozzle) and high infill. The Holes for the axle holder screws can be finished using a 4,5 mm drill by hand.
I already tested this part made of PLA and it survived some rough landings. Ductile TPU will probably be even better.