1 / 2
Himoto EMXT-1 (or HSP or old Reely) front hub carrier / C-hub — image 1
1 / 2

Himoto EMXT-1 (or HSP or old Reely) front hub carrier / C-hub

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

C-hub for old Reely 4WD Monstertruck, corresponding to the Himoto EMXT-1 or another model by HSP

Rating
0 / 5
Likes
4
Downloads
22
Makes
0
Views
159
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Public Domain

This C-hub is designed to be compact and rigid. Its geometry differs slightly to the original part. As a result of the difference, steering and camber turnbuckles have to be tuned after changing from the original to this 3D-part. Monstertruck Wheels still fit with it, short course or buggy wheels will probably fit as well, but onroad wheels probably won't. 

I recommend to print 5 perimeters (with 0,4 mm nozzle) and high infill. The Holes for the axle holder screws can be finished using a 4,5 mm drill by hand. 

I already tested this part made of PLA and it survived some rough landings. Ductile TPU will probably be even better. 

Tags