50 models
My friends Reely Core Z RC car had a broken rear spoiler. Remodeled the thing and printed it in TPU with 4 walls. I uploaded a thicker version than the original because the TPU print with the original thickness is really soft even with…
Make your hose rotate more easily.
Due to the inner ring the shop vac hose can rotate freely (print in place)
Not only for MINI and not only for 2kg spools - it works with the small 500g spool and any with a diameter larger than 15cm! Required Materials You will need the following materials: Printed Base parts (4x) Printed Rail parts (2x) Printed…
Replacement for the broken disk of my RC nitro car REELY Detonator 4WD Outside diameter: 79mm Inside diameter: 69mm Width: 50mm Hexagonal joints: 12 mm/0.47 inch Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes…
Print in PETG or ABS and use the highest quality possible. No support
After mounting the bracket I noticed that the rollers aren't spinning freely anymore, which resulted in severe drag on one side when just turning the Z leadscrew. You could just mount the 2nd Z leadscrew and probably be fine, though I…
Hallo, habe hier mal eine Akku Box für den Reely Rex X /AirAttack 1:8 RC Modell nach gebaut. Der Orignale Akku Halter ist kaputt gebrochen und da habe ich einfach ein Ersatz mit Fusion360 konstruiert. In das Case habe ich 4 Ruthex M3…
This is a shock spring retainer for a Reely Buggy Buzz RC Car. Dies sind Stossdämpfer-Teller für einen Reely Buggy Buzz oder andere ähnliche RC Autos.
This is a replacement part for the throttle of the remote control GT2 evo by Reely. Glueing the throttle did not fix it long term. Printing it did. The remote works again and my son is happy once more! Printed with 0.1 mm layers on a…
I designed this print in place clothes hanger because I am a little obsessive about not buying things I can easily print. It fits on the bed of most medium sized printers like the MK2 / MK3 / MK4. The hook freely rotates and the legs…
Gabelschützer für Reely Adventure Bike/ Dirt Bike, ARX 540, Xrider, usw. Rechts/ links mit und ohne Reely Logo. Erstellt in Tinkercad.
Front suspension spring retainer ring for a Reely 12895 Himoto Tanto type RC car. Haltescheibe für die Feder am vorderen Stößdämpfer eines Reely 12895 Himoto Tanto Fernsteuerautos. Post-Printing As there is a slight overhang, it might be…
I designed a cover so that I don't have to remove small stones and dust from my RC car every time. This should help the electronics and mechanics last longer. This cover fits to Blackzon Slyder and should also fit all cars built on the…
This is a replacement part for the Reely Mission Brushless RC car. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15mm Infill: 100% Filament: Fiberlogy Nylon PA12+CF15 Black Notes: Print…
Skid plates for the Reely Dune Fighter. Fits on the front and back. also for the FS Racing 53625 Marauder Print on the smallest side. I used a raft. Enjoy! Print instructions Infill: 90%
A spoiler with a mount that screws into the holes where the spare Tire sits normally. Screw in the mount first and the glue on the rear wing.
Lots of nice bookends available, so what makes this one special? Freely configurable, OpenSCAD Sourcecode included. Simply change values according your needs. Depending the outer dimensions patterns are automatically generated and…
I've created a remix Benchy that can be easily lengthened or shortened. It uses pins to connect the different sections, allowing for flexible adjustments. I'm excited to share this design and hope you find it interesting! Also using…
Monitor Stand – V-Slot Mount for Neptune 4 Series This stand reuses the original magnetic base and neatly hides the screen cable for a cleaner, more compact setup. It allows the screen to rotate freely to match your viewing angle. You can…
Replacement frame for the "Reely X-82" , aka "X68-T Jumper" easily to modify via the Fusion360 Source: https://a360.co/2PQdRIw V2 is very light and fragil V3 is my current frame, printed in ASA -> lighter than PLA and PETG Share your…
I wanted to create something similar to the mechanic from a hiking pole, but wanted it to be fully 3D printed. Thus I came up with this model. The height can be cut to your desired length. I upload the tested STL files. Assembly: Start…
The first thing you will need to do is unscrew the body at he front. You will then need to screw in the two new pegs at the front in the two holes which look the same as the ones with the pegs in the back. Now you will need to drill two…
Batteriefach Reely Big 1 da mir das original zu oft zerbrochen war habe ich selber was konstruiert. Gedruckt Habe ich mit PETG geslict mit 0.2 gedruckt mit 0.4 Düse Genius Pro. ich wollte edwas haben wo die Batterie schnell und einfach zu…
Querlenker für Reely 1/8
This model is meant to avoid tangled ropes on servo winch on an RC sailboat. I designed this for the REELY B1226, after the ropes always tangled up, when I tried to get the sails closer, but the ropes weren't tensioned perfectly. Winch…
3 roof racks for Reely FreeMen body. _short : cargo area covers the back of the roof only _medium : cargo area covers the back of the roof, running bars up to front without cargo area to leave the sunroof free _long : covers the full roof…
My son lost this cover on his Reely Core Z RC car, so I need to 3D print a replacement.
This C-hub is designed to be compact and rigid. Its geometry differs slightly to the original part. As a result of the difference, steering and camber turnbuckles have to be tuned after changing from the original to this 3D-part.…
Monitor Stand – V-Slot Mount for Neptune 4 Series This stand reuses the original magnetic base and neatly hides the screen cable for a cleaner, more compact setup. It allows the screen to rotate freely to match your viewing angle. You can…
Für die leichte Montage der Lichtleiste
Querlenker für Reely 1/8
as the dart crashed the first time not only the mount for the front Dampers broke but also the part supporting it (10450) broke. So I gave it a shot with scad. I was able to make the part fit but its far from perfect. Print Settings…
deutsch: Ich benötigte einen Würfel mit den Zahlen 1-3. Da ich hier keinen gefunden habe, habe ich selbst einen entworfen. Und weil es so einfach war habe ich die openscad-Datei gleich so gestaltet, dass man jede Seite des Würfels mit…
Ersatzteil von REELY RC sind immer seltener, daher dieser Nachbau. Die Gleitlager des Originals passen und können wiederverwendet werden. Unter umständen kann es je nach Drucker und Filament zu Ungenauigkeiten kommen.
A simple Christmas Tree cotton reel holder. Holds 20 reels with a detachable and optional star for decoration. Height is 20cm and each branch is 8mm in diameter.. Why not print my Needle Ring Threader and hang it on the branches 😉…
Das ist eine Halterung für den Stossfänger an der Front des RC Cars ‘ Reely RaVage ’. Bei meinem Sohn ist diese Halterung leider gebrochen und ich habe sie nirgends als Ersatzteil gefunden. Gedruckt habe ich in PETG mit einem MK4S MMU: no…
Hák na bugynu REELY, včetně ovladače.
Screw in PTFE coupler PC4-M6, insert tube and you are ready to go. Print as is, no supports needed, I recommend to set wall printing order to “Inner/Outer”. If you plan to use PTFE tube with OD4/ID3mm, you can drill 3mm hole into PC4-M6…
Actioncam mount for the Reely X220 race copter. Print Settings Printer: Renkforce RF2000 Rafts: Yes Supports: Doesn't Matter Resolution: 0.1 mm Infill: 25% Notes: I´ve printed this in PLA using 4 solid bottomlayers, 4 solid toplayers and…
Das Teil was immer als erstes bricht
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9OE2dVcuOiN with two of these adapters, you can easily replace the body of your reely R/C car with your own lego technic body. The part is designed in…
To add some details to the hatch. The license plate lights part (non functionnal) may require to move or cut the tool holder a bit. Melt pegs to attach to the body. Should also work with SCX10-2 Cherokee body. Category: R/C Vehicles
Allows simple and effective attachment of the Reely sound module.
This is a multi-part router template for the words, "Grow freely, little wildflower" The tool path is designed for a 1/4" shank and traces the midlines of the text. The word "wildflower" is approximately 6.5" long and the other words are…
deutsch: Ich benötigte einen Würfel mit den Zahlen 1-3. Da ich hier keinen gefunden habe, habe ich selbst einen entworfen. Und weil es so einfach war habe ich die openscad-Datei gleich so gestaltet, dass man jede Seite des Würfels mit…
Ersatzteil von REELY RC sind immer seltener, daher dieser Nachbau. Die Gleitlager des Originals passen und können wiederverwendet werden. Unter umständen kann es je nach Drucker und Filament zu Ungenauigkeiten kommen.
A simple Christmas Tree cotton reel holder. Holds 20 reels with a detachable and optional star for decoration. Height is 20cm and each branch is 8mm in diameter.. Why not print my Needle Ring Threader and hang it on the branches 😉…
