1 / 2
Freely Adjustable Spool Holder (Remix of Prusa MINI+ Spool Holder) — image 1
1 / 2

Freely Adjustable Spool Holder (Remix of Prusa MINI+ Spool Holder)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The remix of the "Prusa MINI+ Spool Holder" with freely adjustable spool base "on the fly", without using any tools.

Rating
5 / 5
Likes
26
Downloads
148
Makes
5
Views
791
Reviews
4

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Not only for MINI and not only for 2kg spools - it works with the small 500g spool and any with a diameter larger than 15cm!

Required Materials

You will need the following materials:

  • Printed Base parts (4x)
  • Printed Rail parts (2x)
  • Printed Adjustment Rods (2x) - help you to adjust the proper distance of the rails, as the cutouts on the base parts have ±0.20mm tolerances
  • Printed Rim parts (4x) - optional for 608 bearings to prevent spools grinding against the sides
  • Bearing 608, 608Z or 608ZZ (4x) - 22mm outer diameter, 8mm inner diameter, 7mm wide (optionally you can use these 3D printed-in-place 608 bearings, even though I recommend getting real ones)
  • M3x12 screws (4x) - for connecting the two sides of the base
  • M3n nuts (4x) - for connecting the two sides of the base
  • M3x8 screws (2x) - for connecting the leftmost base to the rails and holding it in place
  • 10-12mm wide two-sided adhesive tape - optional to fix the rails to the enclosure (you don't need to use it along the entire length of the rails, just enough to hold it in place)

Tags