1 / 2
Collapsible stick with freely chooseable height
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Collapsible stick with freely chooseable height
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Standard Digital File License
I wanted to create something similar to the mechanic from a hiking pole, but wanted it to be fully 3D printed. Thus I came up with this model. The height can be cut to your desired length. I upload the tested STL files.
Assembly:
- Start with models from index 0.
- Put the “Afix” onto the screw of “A”, then insert into the next index of “A”, following the mechanical guides
- Repeat for index 1, 2, …
- Turn the sticks clockwise to fix the sticks to your desired position. Turn the sticks anticlockwise to release them again.
- Exchange “A” for “A_botEnd” or “A_topEnd” when you want to have the bottom base addition or screw at the respecive side.
Example uses:
- Compatible with https://www.printables.com/model/942995-telescopic-table-with-threaded-security-up-to-423m
Print settings:
- 0.4mm nozzle, 0.2mm layer, PLA