Counting matching models…
Scalable, easy to print with flat bottom and minimal supports needed. Check out my whole collection of animals! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld ( https://makerworld.com/makerlab/imageTo3d )
Simple adapter block to drop the childrens' bike rear-axle 5 cm, so younger children can start using the bike. Printed in PETG, with some extra perimeters and infill easily strong enough. Model contains M8 screw thread.
🐱Please check out our other models.🧩 https://www.printables.com/@ManabunLab/collections/2268829 Thank you for viewing. The sale, sharing, and modification of data is prohibited. If you wish to sell prints, please obtain a commercial…
Scalable, easy to print with flat bottom and minimal supports needed. Check out my whole collection of animals! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld ( https://makerworld.com/makerlab/imageTo3d )
a walking stick for a wizard's dummy
Celebrate connection and everyday moments with this Father and Child Walking sculpture. Depicting a parent gently holding a child’s hand mid-step, this piece captures warmth, guidance, and the quiet strength of family bonds. The sculpt…
Celebrate enduring partnership and shared journeys with this Elderly Couple Walking sculpture. Capturing a mature pair mid-stride, this piece reflects companionship, resilience, and the quiet strength of lifelong connection. The figures…
A cover for the tips of your ski poles, so you can use it indoors, such as when you have a bad back and need temporary walking sticks. Can also be used as general protector for your ski pole tips or what they hit. It puts a 25mm rounded…
Not totally tested for strength so take care . Crutch walking middle handle. Easier to reach if seated. Use strongfilament M4 X 20mm bolts M4 X 15mm bolts M4 locking nuts M6 X 50 Bolts M6 locking nuts All 3D Prnted at 100 % infill. The…
Print this adorable walking cat and watch it wiggle! All joints are fully articulated straight off the build plate — no assembly, no supports, no glue. Features - Print-in-place, all joints move immediately - No assembly, no supports…
Included 2 versions, 1 with storage, and 1 filled. The bell and bell tongue require a piece of string to be thread through. The pattern on the lid was achieved with hilbert curve bottom layer infill and 0.6mm wall thickness on bottom…
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Video: The Basic Walker in action. The Basic Walker is a walking mechanism to which skins may be added to create a range of walking toys. Print in place bearings and gear trains have a relatively large amount of backlash. In the ordinary…
For that extra bit of style, for the gentleman, lady or otherwise fine folk of extravaganza. A lit up d20 crowns this cane. All you need: 1 55mm d20 (Koplow) 3 d20 holders 1 shaft head 1 shaft battery 1 shaft bottom 1 foot 12 M3x10mm…
You want to walk in style with a fancy Critical Cane but don't want to deal with soldering electronics. Here is your way to go. A more compact design of a connector for the Critical Cane. All you need: 1 shaft head 3 d20 holders ( here )…
My daughter requested a ghost cat be added to the infamous TJMaxx ghost walking dog, and here we are.
Does your cat look bored outside a window? Doesn't your old cat jump to her favorite spot anymore? Is your cat in need for a new exciting toy? Do you want to print something cool looking and useful for your cat? Then you will need this…
Hello everyone. After a surgical operation, I needed a cane to walk, and I had to do some physical rehabilitation like cycling. But how to carry a cane that is 1 meter long when exercising? My backpack had molle system on the back and the…
You're out in the cafe, lean your stick against the edge of the table, and one minute later >CRASH!< it hits the floor. Sometimes that floor feels a long way down. This clip fits onto your stick (22.7mm or one inch models available, scale…
Halloween walking imps, the shape is very cute, you can walk by twisting the clockwork, it is also very easy to install, you can insert the walking movement into it, you don't need glue and screws, and it will not fall off . You need to…
I tried to make a robot that everyone can enjoy. 3D Data, How to Make, and Code are open to the public. The power supply is designed to be safe with AAA batteries. How about as a material for STEM/STEAM education? Concept is Easy Easy to…
Small storage box originally made to be used for a person with reduced mobility (PRM) walking chair where wallet, phone etc. can be stored. The box was printed in PLA material (however, I would recommend PETG as it has better material…
Here is my Walking Dead Daryl Dixon Coaster. Three coasters fit perfect in the Coaster Holder Print instructions Unassociated tags: daryl dixon Category: Food & Drink
Here is my Rick Grimes Coaster. Three Coasters fit perfect into the coaster holder Print instructions Unassociated tags: rick grimes Category: Food & Drink
Designed for my Trekker Black Wolf telescopic sticks, but then again should work for other sticks too, if the geometry is close enough. I printed them in TPU, 100% infill.
So, my mom found a stick and declared it's the best cane ever. Tried out many ready to buy ones an none was as comfortable and light as the crooked stick. And since she has some problems with the wrists this could've been legit. And she…
Added a hole for the strap so that the remote could be worn if taken of the desk mount.
Crosshair for walking crutches just for fun :D. Printing in PETG. Diameter 19mm.
It is necessary to print two legs and a body. The parts are fastened with a screw, the limiting axis of the legs is made of a toothpick. An inclined plane of 10-15 degrees is required for movement.
Some folding walking sticks come packed in a flimsy plastic bag, others come with a retaining clip. This clip is designed much like the originals, but with thicker walls and slightly chamfered edges to make it easier to fit. One side has…
Simple adapter block to drop the childrens' bike rear-axle 5 cm, so younger children can start using the bike. Printed in PETG, with some extra perimeters and infill easily strong enough. Model contains M8 screw thread.
Scanimation , also known as barrier-grid or picket-fence animation, brings static images to life through a clever interplay of vertical lines and motion. By integrating this fascinating optical illusion into a functional timepiece, we’ve…
Walkingpad r2 cupholder, printed in 2 parts and glued together. made a version that prints the mount on the side for a stronger part I used abs and acetone to glue it
🐱Please check out our other models.🧩 https://www.printables.com/@ManabunLab/collections/2268829 Thank you for viewing. The sale, sharing, and modification of data is prohibited. If you wish to sell prints, please obtain a commercial…
This is a simple Laptop holder that clamps on to the handle bar of a treadmill or walking pad. I designed it so it can fit a thin rubber/foam piece so the handle doesn't get damaged and you can get a nicer fit. You need 3 inch M8 Bolts…
The one thing I seem to damage but can find no replacement for is the plug that fits into the end of the walking stick. I found without this the walking stick would push through the Ferrule. Most likely as my walking stick doubles as a…
Tray table for the Sperax Walking Pad: Available in LH or RH side versions. As well as cup holder version for RH side Designed to be level when stability bar is in forward position. About 8 degrees past vertical. Hardware Required: 4x M3…
Stand Alone Cup Holder for the Sperax Walking Pad: Designed to be level when stability bar is in forward position. About 8 degrees past vertical. Hardware Required: 4x M3 washers 4x M3 Heat inserts 4x M3 Bolts - I used cap heads, but I…
Miniature businessman for your diorama, architectural miniature or as a figurine. Man | Businessman | Architectural figurines | People | Person The businessman is suitable for 3D models of city or architectural diorama. Printable for the…
Langlauf Nordic Walking Ski Poles Holder / Clamp V3 - D15mm / D12mm - up to 47mm V2 - D16mm / D13mm - up to 50mm PETG is maybe better for cold wetter and more flexible.
My wife loves going for walks and I printed a bunch of these little tokens and a small gift box. Whenever she wants to go for a walk, all she has to do is use a token and no one can decline her request. Silly little idea to add a bit of…
Since I keep losing my remote on my desk, I decided to give it a permanent home on my Skadis.
A nice decoration everyone needs in his living room ;-) You will need supports for printing. The models have around 120mm height and it took me half an hour and 10g for printing with 3 perimeter, 0.2 layer height and 10% gyroid infill.…
Arachnobeest A lightweight, easy-to-print walking octopod robot based on Jansen linkages. With just a handful of bolts the entire robot can be built and controlled with parts in the standard XRP robotics kit. Assembly In Progress Control…
Folded up and pushed in, ready for transportation. For anyone who sometimes needs a walking stick for walking, but which can also be folded when not needed. This holder makes it easy to store and transport the walking stick. The model was…
Tired of boring rubber pole tips? These Nordic walking tips in a fun champagne glass shape add some style to your hikes! Designed to fit poles with a 9.7 mm bottom diameter . For best results, print them with 100% infill using a flexible…
Mechanics always say there 10mm sockets just walk away. These actually do! Link for walking mechanism: 5Pcs Walking Toy Movement Wind Up Toy DIY Crafts Clockwork Legged Robot For Handmade Accessories Mini Walking Robot Amazon:…
Walking Mushroom Keychain – Dungeon Meshi Inspired Here's a fun and quirky keychain featuring the adorable Walking Mushroom from Dungeon Meshi! Perfect for fans of the series who want to carry a little bit of dungeon charm wherever they…
This is another walking robot toy design. It's a little different from the pin walkers I've posted before. It has legs that bend at the knees to give a more realistic walking motion. The ideal behind it was to turn the pin walker…
I've been inspired and educated by Robothuts walking toys so I thought I would try to design one. This is a pin walker type design. I was trying for something small and simple so I designed it around a 6 Volt N20 gearmotor and two 2032…
This is my remix of Robothuts "Rocking Body Walking Robot Drone #5". I built his original design and several others he's posted to Thingiverse. His original design is a pin walker driven by one motor/gearbox. It walks in a straight line…
A simple clip for holding two walking poles together. Clips poles that are 15 to 17mm in diameter. Print in PETG with 5 perimeters and solid infill.
Chibi style model of Frieren walking with her suitcase. Two versions of STL uploaded, the only difference is blank eyes vs. modeled eyes. PRINTING Rotate 30° backward. Other orientations may work but I didn't try. Supports are required .…
You have seen him roll, now see him walk. Link for walking mechanism: 5Pcs Walking Toy Movement Wind Up Toy DIY Crafts Clockwork Legged Robot For Handmade Accessories Mini Walking Robot Amazon: https://a.co/d/eNoDucq Aliexpress:…
Walking Gonk Droid Link for walking mechanism: 5Pcs Walking Toy Movement Wind Up Toy DIY Crafts Clockwork Legged Robot For Handmade Accessories Mini Walking Robot Amazon: https://a.co/d/eNoDucq Aliexpress:…
Development Background During lessons using the Walking MechatroWeGo, accidents frequently occur where the robot falls off the desk. The Walking MechatroWeGo is a small bipedal robot developed by Living Robot Inc., a company based in…
A family member had a walking stick with a hard plastic end cap (or foot/boot) so I made this replacement for him out of TPU at 30% infill. It fits a 19cm diameter shaft. (7" 31/64th in old money). Hope someone finds it useful.
Sometimes you just need to clear a narrow path to walk on, or for car tire tracks, and you don't want to clear your whole driveway. Especially if you have 300' of driveway. You can push this plow easily at walking speeds, and because it…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 173.1x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm…
Rubber Buffer for Nordic Walking Poles or Hiking Poles. Just press it on the pole. Size See drawing. Adapt the provided FreeCAD model to your needs. Printing TPU 95A, Nozzle 0.4 mm, Layer height 0.2 mm, 4 wall loops, 7 bottom shell…
A modern low-poly interpretation of a walking turtle, realized as a sculpture. Ideal as a decoration for the living room or garden. The model's standard dimensions are 200 mm x 120 mm x 103 mm (freely scalable). Printed with the following…
Xiaomi Walkingpad C1 Smart Folding Walkingpad Machine Treadmill foot replacement TPU
Fun articulated toy - a moving chicken walking along a sloping walkway. It is a mechanical figure, no electronic device. The parts fit together tightly, no glue is necessary. You can use glue on the legs if you want. When assembling the…
Printed at 0.2 layer height, lay on the bed with supports (bed only, drawed just on side).
Put flat side down with slicer. Draft quality is sufficient with 15%infill. Tighten screws carefully not to brake the handle. not too tight. Put some inner tube between handle and bike shaft. you will need M5x15x2, M5 nyloc bolt x2 and…
This is a surreal sculpture based on the famous Utah Teapot , in honor of the 50th anniversary of Martin Newell's creation. I made this model in Fusion, based on Newell's original drawing, so it is my own creation and not a remix.…
These bowls require special processing. You cannot simply use vase mode because the bottom of the ball part is too shallow and the layers are too far apart, so will sag and or fall out. The trick is to set them up as you would in vase…
This model can be print with mutiple color with one color printers. You have to change filament at the following height layer: Start by body color (white) 1,2 mm hat color (beige) 1,4 mm cloth color (blue) 1,6 mm beak and legs color…
A replacement bracket and holder for a walking stick to replace the orignal in case it's damaged. The bucket is a friction fit to bracket B. This uses M5 screws and nuts to connect the brackets, the nuts may friction fit, but a bit of…
Just press fit the rubber into to the pole tip. material: TPU 85A. very durable and silent, bouncy when waking on rocky paths. 0.4 nozzle, 0.2 layers, ‘strong’ profile with 6 walls, 50% cubic infill (cubic is important because it creates…
A new 3D figurine generated by AI, a mummy. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Ich hatte mal so ähnliche Pads, von einem Kleinst-Privat Hersteller. Leider hat er die Produktion vor Jahren eingestellt. Also habe ich mich daran gemacht, diese aus der Erinnerung nachzubauen. Ich finde, es hat ganz gut geklappt.…
I sometimes need to take my crutches with me when using my rollator (to help with steps etc), and found that to buy a holder for my make of rollator was going to cost nearly £70 for the pair!! So do I but them? Heck no! I nab my partners…
Updated instructions images 2, 7 & 8 A straightforward quadruped robot used as a demonstration for a battery holder for this 2 AA batteries . You can find the assembly instructions for the battery holder Here The print is simple and…
🎃👣 Halloween Walking Pumpkin Pot 👻✨ This funny little pumpkin has legs and a cheeky smile, making it look like it could walk right off the shelf! Perfect as a spooky mini pot or just a cute Halloween decoration. 🟠 Great for: Mini candies…
A deeply carved walking bear with a great flowing style scalable to any size! Check out all my other animals!!! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This charming figurine captures the iconic Highland cow with its long flowing hair, small horns, and sweet expression. With fine detailing in the fur and a sturdy build, this piece makes a delightful decorative figure or collector’s item.…
Fits regular walking sticks around 35mm in diameter. I printed in PETG with two walls and 20% infill.
I highly recommend @johnv 's amazing walking chicken . I wanted more control over the length of the track and I had a piece of HEJNE around, and the rest is history!
🕯 Jackbeet – The Walking Lantern – From Cute & Cursed: The Chibiween Collection 🎃 Meet Jackbeet , the cheerful jack-o’-lantern who decided to grow legs just so he could dance at Halloween parties! 🕺 With his ever-burning candlelight and…
Feet for the bottom of a Sperax vibrating walking pad to increase the angle of the pad. I have a model Sp-ca-01, I don't if this would work for any other model of walking pad. You can find a link to a parameterized onshape part here . The…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
![[STEM] Raspberry Pi Pico Open RC Walking Robot](https://media.printables.com/media/prints/1034672/images/7848815_eb8384ee-6100-4aa7-bf07-0ac12e676f96_ff5739a9-d545-43a4-a239-37db13da7a26/balance.jpg)
