walking table model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a model for a full size table that i had designed to be made in bamboo…
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 143
- Makes
- 0
- Views
- 1,254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
this is a model for a full size table that i had designed to be made in bamboo
http://hackaday.com/2013/12/04/crab-ble-a-table-that-walks/#more-108937
Instructions
print all the parts at 0.25 mm layer height using a .4 or less nozzle.. the parts are interconnected using a m3 threaded rod and nuts ... the battery holder is mounted in the center..
print 6 sets of the leg set and 2 sets of the cross brace set..
for anybody interested in making it i woulf be making a detailed assembly diagram.
the motors are optional .. the model can be moved manually also if needed.. i used 1:100 ratio 6v geared dc motors....
also a lot of plastic lubricant is needed and it tends to jam up
the legs are joint together using m3 x 12 mm hex nut and bolt
you need brass or pcb spacers of 5 or 5.5 mm for the leg pivots... also to mount the motors you need a 6x3mm pipe cut to length to clamp the motor mounts on
guide : https://www.dozuki.com/Guide/crabble+assembly+guide/6677
Category: Model Furniture